HP Pro Tower 400 G9 PCI Desktop PC Maintenance and Service Guide - Page 92
POST numeric codes and text messages, continued
View all HP Pro Tower 400 G9 PCI Desktop PC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Table 7-1 POST numeric codes and text messages (continued) Control panel message Description 008-Microcode Patch Error Processor is not supported by the BIOS. 009-PMM Allocation Error during MEBx Download Memory error during POST execution of the Management Engine (ME) BIOS Extensions option ROM. Recommended action section for instructions on installing a new battery. 1. Upgrade BIOS to proper version. 2. Change the processor. 1. Reboot the computer. 2. Unplug the power cord, reseat the memory modules, and reboot the computer. 3. If the memory configuration was recently changed, unplug the power cord, restore the original memory configuration, and reboot the computer. 4. If the error persists, replace the system board. 00A-Product Information Not Valid 00B-MEBx Module did not checksum correctly 00C-PMM Deallocation Error during MEBx Cleanup 00D-Setup Error during MEBx Execution The product information programmed into Use Computer Setup to update this the system board is missing or invalid. information. Memory error during POST execution of the Management Engine (ME) BIOS Extensions option ROM. 1. Reboot the computer. 2. Unplug the power cord, reseat the memory modules, and reboot the computer. 3. If the memory configuration was recently changed, unplug the power cord, restore the original memory configuration, and reboot the computer. 4. If the error persists, replace the system board. Memory error during POST execution of the Management Engine (ME) BIOS Extensions option ROM. 1. Reboot the computer. 2. Unplug the power cord, reseat the memory modules, and reboot the computer. 3. If the memory configuration was recently changed, unplug the power cord, restore the original memory configuration, and reboot the computer. 4. If the error persists, replace the system board. MEBx selection or exit resulted in a setup failure. 1. Reboot the computer. 2. Unplug the power cord, reseat the memory modules, and reboot the computer. POST numeric codes and text messages 85