HP ProLiant DL288 Configuring Arrays on HP Smart Array Controllers Reference G - Page 77
Category, Options, Description, HBA category
View all HP ProLiant DL288 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
• Control category (on page 78) • Controller category (on page 78) • Array category (on page 81) • Logical Drive category (on page 83) • HBA category (on page 86) Each category has several scripting options, but you do not always need to assign values to every option. ACU can use default values in some instances, while in other instances, a listed option might not be relevant for a particular configuration or scripting mode. The options for each category are listed in the following table and described in more detail in the remainder of this section. Category Options Description Control Controller Array Action Method Controller ChassisName ClearConfigurationWithDataLoss DeleteLicenseKey DPOEnable ElevatorSortEnable ExpandPriority IRPEnable LicenseKey MNPDelay PreferredPathMode QueueDepth ReadCache RebuildPriority SSPState SurfaceScanDelay WriteCache Array Drive DriveType OnlineSpare These options define the overall behavior of ACU when it processes scripts and creates configurations. Control options can occur only once in a script file and must be listed first. Options in this category specify the controller that is to be configured (or the controller that had its configuration captured). Although the Controller option must begin this section of the script, you can script other options in this category in any order. You can use one script file to configure all controllers in a system, and you can configure the controllers identically or individually. If you define each controller configuration individually, enter the option values for one controller and its arrays and logical drives before specifying the option values for another controller. These options describe an array that is to be configured on the controller that was previously specified in the script. (If no controller was previously specified, ACU stops processing the script and creates an error file.) Although the Array option must begin this section of the script, you can script the other options in this category in any order. HP Array Configuration Utility 77