HP ProLiant SL390s HP ProLiant SL390s G7 1U half width Server Maintenance and - Page 46
CAUTION, To install a memory module
View all HP ProLiant SL390s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Figure 23 Removing a memory module CAUTION: Place the memory module on a static-dissipating work surface or inside of an anti-static bag. To install a memory module: 1. Align the notch on the bottom edge of the module with the keyed surface of the DIMM slot and then press the module fully into the slot. 2. Firmly press the holding clips inward to secure the memory module in place. Figure 24 Installing a memory module CAUTION: The memory slots are structured to ensure proper installation. If you insert a memory module but it does not fit easily into the slot, you may have inserted it incorrectly. Double-check the orientation of the module and reinsert. If the holding clips do not close, the module is not inserted correctly. Removal and Replacement Procedures 46