HP ProLiant SL390s HP ProLiant SL390s G7 1U half width Server Maintenance and - Page 52
Personality board
View all HP ProLiant SL390s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Figure 34 Removing the system board from the tray IMPORTANT: Do not discard the screws. If the system board is removed in the future, you must keep them for future use. To replace the system board: 1. Put the system board in the tray. The screw holes on the tray should align with the holes on the system board. 2. Fasten the screws to secure the system board to the tray. Figure 35 Fastening the system board to the tray Personality board To remove the Personality board: 1. Remove the five screws that secure the personality board to the tray. Removal and Replacement Procedures 52
Removal and Replacement Procedures 52
Figure 34
Removing the system board from the tray
IMPORTANT:
Do not discard the screws. If the system board is removed in the future, you must keep
them for future use.
To replace the system board:
1.
Put the system board in the tray. The screw holes on the tray should align with the holes on the
system board.
2.
Fasten the screws to secure the system board to the tray.
Figure 35
Fastening the system board to the tray
Personality board
To remove the Personality board:
1.
Remove the five screws that secure the personality board to the tray.