HP ProLiant SL390s HP ProLiant SL390s G7 1U half width Server Maintenance and - Page 74
Table 9, Components, Description, Dimensions H x W x D
View all HP ProLiant SL390s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Table 9 Hardware Specifications Item Thermal solution Components Eight 80mm system fans Table 10 Physical Dimensions Item System board platform System board dimension Dimensions (H x W x D) (with bezel) Server weight (approximate) Description ATX (Advanced Technology Extended) 17.935''x6.5'' 6.96 x 17.64 x 35.32 inch Full loading (all memory, hard drives, power supplies, and processors installed) 68.1kg Light loading (one piece of memory, one hard drive, and one processor 8 trays installed) 55.2kg Table 11 Environmental Specifications Item Description Thermal output (maximum operating) 392 W/hr System inlet temperature Operating 50° to 95° F (10° to 35° C) at sea level with an altitude derating of 1.8°F per every 1000 ft (1.0°C per every 305 m) above sea level to a maximum of 10,000 ft (3050 m), no direct sustained sunlight. Maximum rate of change is 18°F/hr (10°C/hr). The upper limit may be limited by the type and number of options installed. System performance may be reduced if operating with a fan fault or above 86°F (30°C). System inlet temperature Non-operating 40° to 140° F (-40° to 60° C) Maximum rate of change is 36°F/hr (20°C/hr). Relative humidity (non-condensing) Operating 10% to 85% relative humidity (Rh), 82.4°F (28°C) maximum wet bulb temperature, non-condensing. Relative humidity (non-condensing) Non-operating 10% to 95% relative humidity (Rh), 101.7°F (38.7°C) maximum wet bulb temperature, non-condensing. Altitude Operating 10,000 ft (3050 m). This value may be limited by the type and number of options installed. Maximum allowable altitude change rate is 1500 ft/min (457 m/min). Altitude Non-operating 30,000 ft (9144 m). Maximum allowable altitude change rate is 1500 ft/min (457 m/min). 74