HP StorageWorks 16-EL diagnostic and system error messages version 3.1.x refer
HP StorageWorks 16-EL - SAN Switch Manual
View all HP StorageWorks 16-EL manuals
Add to My Manuals
Save this manual to your list of manuals |
HP StorageWorks 16-EL manual content summary:
- HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 1
reference guide hp StorageWorks diagnostic and system error messages version 3.1.x Product Version: 3.1.x First Edition (July 2003) Part Number: AA-RUPZA-TE This reference guide lists Fabric OS diagnostic and system error messages. The probable cause and recommended course of action is provided for - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 2
warranty statements for such products. Nothing herein should be construed as constituting an additional warranty. Printed in the U.S.A. Diagnostic and System Error Messages Version 3.1.x Reference Guide First Edition (July 2003) Part Number: AA-RUPZA-TE - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 3
10 Text Symbols 10 Getting Help 11 HP Technical Support 11 HP Storage Website 11 HP Authorized Reseller 12 1 Introduction to System Error Messages 13 Error Message Severity Levels 13 Overview of System Logs 15 System Error Log 16 Syslogd Daemon 16 Port Logs 17 System Console 17 View or - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 4
-INVLSR 44 FLOOD-LINKCNT 44 FSPF_System Error Messages 46 FSPF-INPORT 46 FSPF-NBRCHANGE 46 FSPF-REMDOMAIN 47 4 Diagnostic and System Error Messages Version 3.1.x Reference Guide - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 5
-UNEXPECTED_IUDATASZ 70 MS-UNSTABLE_DCOUNT 71 MS-UNSTABLE_FABRIC 71 NBFSM_System Error Messages 73 NBFSM-DUPEPORTSCN 73 NBFSM-NGBRSTATE 74 Diagnostic and System Error Messages Version 3.1.x Reference Guide 5 - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 6
SECLIB-SECVIOL_LOGIN_SERIAL 95 SECLIB-SECVIOL_MSaccess 96 SECLIB-SECVIOL_MSfwrd 97 SECLIB-SECVIOL_MSop 97 SECLIB-SECVIOL_RSNMP 98 SECLIB-SECVIOL_SCC 98 6 Diagnostic and System Error Messages Version 3.1.x Reference Guide - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 7
SLAP_SECPOLICYINIT 101 SLAP_SIGNCHECKFAIL 101 SLAP_WWNCHECKFAIL 102 SWITCH_System Error Messages 103 SWITCH-SECVIOL_DCC 103 TRACK_System Error Messages 104 TRACK-CONFIG_CHANGE 104 TRACK TRANSCOMMIT 120 ZONE-WWNINPORT 120 Diagnostic and System Error Messages Version 3.1.x Reference Guide 7 - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 8
Error Messages 129 9 Warning-Level Error Messages 131 10 Informational-Level Messages 133 11 Debug-Level Messages 134 8 Diagnostic and System Error Messages Version 3.1.x Reference Guide - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 9
operate, maintain, and troubleshoot your Storage Area Network (SAN) switch and your SAN. About this Guide The major topics discussed . For the latest information, documentation, and firmware releases, visit the HP StorageWorks website: http://www.hp.com/country/us/eng/prodserv/storage.html. - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 10
uppercase monospace font unless they are case sensitive Blue, underlined sans serif font text: http://www.hp.com Text Symbols The following symbols may be found in the text of this guide. They have the following meanings. WARNING: Text set off in this manner indicates that - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 11
questions not covered in this document, contact an HP authorized service provider or access our website: http://www.hp.com. HP Technical Support Telephone numbers for worldwide technical support are listed on the HP website: http://www.hp.com/support/. From this website, select the country of origin - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 12
About this Guide HP Authorized Reseller For the name of your nearest HP authorized reseller: ■ In the United States, call 1-800-345-1518 ■ In Canada, call 1-800-263-5868 ■ Elsewhere, see the HP website for locations and telephone numbers: http://www.hp.com. 12 Diagnostic and System Error Messages - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 13
to System Error Messages 1 This book supports Fabric OS version 3.1.x and contains diagnostic and definitions of the severity levels are quite general and should be used as guidelines for troubleshooting. In each case, you should thoroughly assess each error log description before taking - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 14
further clarification. Telephone numbers for worldwide technical support are listed on the HP website: http://www.hp.com/support/. From this website, select the country of origin. The severity levels are specified in Table 2. 14 Diagnostic and System Error Messages Version 3.1.x Reference Guide - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 15
in the log files. Note: The contents of the Port Logs and instructions for setting up syslogd are discussed in the HP StorageWorks HP StorageWorks Fabric OS Procedures Guide. The contents of the Panic Trace Logs are intended for support use only. l Diagnostic and System Error Messages Version - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 16
by its configuration file. Refer to the manual pages and related documentation for your particular UNIX support standard syslogd to receive error log messages from the StorageWorks Core switch or StorageWorks 2 Gb SAN switch. 16 Diagnostic and System Error Messages Version 3.1.x Reference Guide - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 17
particular port. Refer to the HP StorageWorks Fabric OS Procedures Guide for information on interpreting the output from the portlogdump command. Note: The Port Log functionality is completely separate from the System Error Log functionality. Typically, Port Logs are used to troubleshoot connection - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 18
switch. Display the port error summary. Display the port status bitmaps for all ports in a switch. Clear the Port Log. If the Port Log is disabled, this command enables it. Disable the Port Log facility. Display the Port by technical support to diagnose and correct problems with the switch. The Guide - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 19
switch from the Fabric Tree. The Switch View appears. 3. Select the Switch Events button from the Switch View. A Switch Events Report appears. 4. View the switch Error Log without Page Breaks To display the Switch Error Log without page breaks: 1. Log in to the switch as the admin user. 2. Enter the - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 20
16:01L44 (12) Switch: 1, info TRACK-CONFIG_CHANGE, 4, Config file change from task:ZNIPC Error 02 -------0x2f0 (fabos): Mar 24 15:07:01 Switch :06 Switch: 1, Info EM-BOOT, 4, restart reason: Failover switch:admin> log with page breaks: 1. Log in to the switch as the admin user. 2. Enter the errclear - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 21
Error log with page breaks Clearing the Switch Error Log To clear the error log for a particular switch: 1. Log in to the switch as the admin user. 2. Enter the from the error log. Error 1001 -------0x253 (fabos): Nov 03 14:11:53 Switch: 1, Error EM-CP_ERR, 2, CP in slot 5 set to faulty because of - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 22
with the error itself and should not be used when contacting Technical Support. The date and time the error message occurred. The logical switch that was affected (number values are 0 and 1). The severity of in Appendix A. 22 Diagnostic and System Error Messages Version 3.1.x Reference Guide - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 23
Severity level Gathering Information About the Problem The following are recommended actions for troubleshooting a system error message. Note that all of the information collected here should be provided to Technical Support if you require troubleshooting assistance. ■ Run supportshow and pdshow and - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 24
error messages: ■ Run supportshow and pdshow and provide the output to Technical Support. ■ Gather logs. ■ Watch for reoccurrence. ■ Reinstall firmware. ■ Reboot the machine. ■ Revert to previous firmware version. ■ Call support. 24 Diagnostic and System Error Messages Version 3.1.x Reference - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 25
PID_System Error Messages on page 77 RCS_System Error Messages on page 78 RTWR_System Error Messages on page 81 Diagnostic and System Error Messages Version 3.1.x Reference Guide 25 - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 26
ports. The user defines a group of ports switch number> Error AS-CTMALLOC, 2, : ctMalloc for bytes failed Explanation Memory allocation failure. Fabric OS error. Recommended Action Copy the name of the error (AS-CTMALLOC) and then call Technical Support - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 27
and then contact Technical Support. Technical Support may also ask for additional debug information from POST and systemtest. Severity Warning BLOOM-BUF_RECLAIMED Message Info BLOOM-BUF_RECLAIMED, 4, Explanation If the specified port was previously disabled - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 28
information and then contact Technical Support. Technical Support may also ask for additional debug information from POST and systemtest. Severity Warning BLOOM-NO_BUFFERS Message Warning BLOOM-NO_BUFFERS, 3, Explanation The specified port was disabled due to lack - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 29
to capture debug information and then contact Technical Support. Technical Support may also ask for additional debug information from POST and systemtest. Severity Critical BLOOM-STUCK_WAIT Message Panic BLOOM-EXCESSIVE_BUSY_MINI, 0, - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 30
to the OPEN state when executing the Loop Port Control (LPC) command. Recommended Action Copy the error message information, run portlogdisable and supportshow (in order) to capture debug information and then contact Technical Support. Technical Support may also ask for additional debug information - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 31
storage so the information can be retrieved and displayed later. ERRLOG-LOGCLRD Message Info ERRLOG-LOGCLRD, 4, Error log cleared Explanation Informational message stating that the issued by the user. Diagnostic and System Error Messages Version 3.1.x Reference Guide 31 - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 32
errclear -p command. Recommended Action No action required. Severity Informational ERRLOG-NV_LOG_RESIZE Message Info ERRLOG-NV_LOG_RESIZE, 4, Persistent error log is resized to - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 33
-SET_MSG_SAVE_LVL Message Info ERRLOG will be saved. The maximum number of persistent messages is 256. HP recommends that you always set the Persistent Error Log to record at required. Severity Informational Diagnostic and System Error Messages Version 3.1.x Reference Guide 33 - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 34
the domain and alias list to all switches in the fabric. FABRIC-ASYNC Message Warning FABRIC-ASYNC, 3, port: , req iu: - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 35
number> Critical FABRIC-SIZE_EXCEEDED, 1, "Critical fabric size exceeds configuration Switch status marginal. Contact Technical Support." Explanation There are too many switches in the fabric. Diagnostic and System Error Messages Version - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 36
supported configuration. Recommended Action Remove switches from the fabric until the fabric meets the supported supported configuration, then Web Tools will be disabled in the specified number of days, hours, and minutes. 36 Diagnostic and System Error Messages Version 3.1.x Reference Guide - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 37
FABRIC_System Error Messages Recommended Action Remove switches from the fabric until the fabric meets the supported configuration. Severity Critical Diagnostic and System Error Messages Version 3.1.x Reference Guide 37 - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 38
are FC-0, FC-1, and FC-2 of the Fibre Channel protocol. FCIU-IUBAD Message Debug FCIU-IUBAD, 5, invalid iu Explanation An invalid IU ( information printed with this error. Contact Technical Support with both sets of information. Severity Debug 38 Diagnostic - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 39
FCIU_System Error Messages FCIU-IUCOUNT Message Critical FCIU-IUCOUNT, 1, count - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 40
FCP switch probes devices on the loop port; probing timed out on the specified port for the specified ALPA (arbitrated loop physical address). Port number values can be 0-15; the ALPA range is any value 00 - FF. Recommended Action Retry the action. If the error persists, contact Technical Support - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 41
"hand-shaking" between two Fibre Channel ports. FCPH-EXCHBAD Message Critical FCPH-EXCHBAD, 1, bad . ■ - The physical port number. ■ - The Fibre Channel class of service. ■ - The receiver unsolicited Version 3.1.x Reference Guide 41 - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 42
error. Contact Technical Support with both sets of information. Severity Critical FCPH-EXCHFREE Message Debug FCPH- flags. ■ - The physical port number. ■ - The Fibre Channel class of service. ■ - The receiver unsolicited - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 43
supportshow command; the error message trace information shows where the IU error message occurred. Copy the trace-back information printed with this error. Contact Technical Support with both sets of information. Severity Debug Diagnostic and System Error Messages Version 3.1.x Reference - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 44
State Records (LSR). FLOOD-INVLSR Message Warning FLOOD-INVLSR, 3, Unknown LSR type: port , type Explanation user action is required. Severity Warning FLOOD-LINKCNT Message Warning FLOOD-LINKCNT, 3, Link count exceeded in received - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 45
FLOOD_System Error Messages Recommended Action The record will be discarded. No user action is required. Severity Warning Diagnostic and System Error Messages Version 3.1.x Reference Guide 45 - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 46
-NBRCHANGE, 4, Wrong neighbor ID in Hello Explanation Wrong Domain ID from neighbor (adjacent) switch in the Hello message from the specified port. This can occur when a Domain ID for a switch has been changed. 46 Diagnostic and System Error Messages Version 3.1.x Reference Guide - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 47
code> Explanation An invalid Switch Change Notification (SCN) was reported for the specified port. The valid SCNs are 1 (on line), 2 (off line), 3 (testing), 4 (faulty), 5 (E_Port), 6 (F_Port), 7 (segmented), and 8 (T_Port). Diagnostic and System Error Messages Version 3.1.x Reference Guide 47 - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 48
Explanation An incorrect section ID was reported from the specified input port. HP supports only Section ID 0 (zero). Recommended Action Verify that the reported Section ID is 0 (zero). Severity Error FSPF-VERSION Message Error FSPF-VERSION, 2, FSPF Version not - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 49
FSPF_System Error Messages Recommended Action Update the FSPF version by loading the correct version of firmware. Severity Error Diagnostic and System Error Messages Version 3.1.x Reference Guide 49 - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 50
, and exchanges FSPF parameters and capabilities. HLO-DEADTIMEOUT Message Error HLO-DEADTIMEOUT, 2, Incompatible Inactivity timeout from port , correct value Explanation The HELLO message was incompatible. The dead timeout value does not match - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 51
protocol), the local switch will not accept FSPF frames from the remote switch. Recommended Action The HELLO timeout value of the remote switch must be made Error HLO-INVHLO, 2, Invalid Hello received from port , Domain = , Remote Port = - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 52
. The HELLO message of the remote switch must be made compatible with the value specified in the FSPF protocol. See the manufacturer's documentation to change this value. Call Technical Support with questions. Severity Error 52 Diagnostic and System Error Messages Version 3.1.x Reference Guide - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 53
of the Fabric Shortest Path First (FSPF) protocol that manages the Link State Database. LSDB-LSID Message Error LSDB-LSID, 2, Link State ID out of range Explanation The Link Informational Diagnostic and System Error Messages Version 3.1.x Reference Guide 53 - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 54
Link State Database. Recommended Action Perform a switch disable and enable. Severity Critical LSDB-NOLSR Message Warning LSDB-NOLSR, 3, No specified local domain. Recommended Action Perform a switch disable and enable. Severity Warning 54 Diagnostic and System Error - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 55
Warning MCAST-ADDPORT, 3, Add port failed: Mcast Grp = , Src = , Dest = Explanation The add port failed to configure a port to be a member of a specified MCAST group. Diagnostic and System Error Messages Version 3.1.x Reference Guide 55 - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 56
ID is valid (0 through 254). Severity Warning MCAST-REMPORT Message Warning MCAST-REMPORT, 3, Remove port failed: Mcast Grp = , Src = , Dest = Explanation The Remove Port failed to cancel the membership of a specified MCAST group for - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 57
Error MPATH-NOPARENTLSR, 2, Null lsrP, lsId = Explanation The Link State Record is null. Recommended Action No action required. If the error is not persistent, it is not a problem. Severity Error Diagnostic and System Error Messages Version 3.1.x Reference Guide - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 58
System Error Messages MPATH-UNREACHABLE Message Warning MPATH-UNREACHABLE, 3, No minimum cost path in candidate list Explanation No minimum-cost path Recommended Action No action required. Severity Warning 58 Diagnostic and System Error Messages Version 3.1.x Reference Guide - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 59
or Interrupt Service Routine (ISR) can write messages to a message queue. Any process can read messages from a message queue. MQ-MSGTYPE Message Error - 6MSG_ASYNC_IU - 7MSG_LINIT_IU - 8MSG_RSCN - 9MSG_IOCTL Diagnostic and System Error Messages Version 3.1.x Reference Guide 59 - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 60
record the output. Provide the mqshowall output and the error message to Technical Support. Severity Error MQ-QREAD Message Critical MQ-QREAD, 1, mqRead, queue = , queue err_q - diag_q - fabric_q 60 Diagnostic and System Error Messages Version 3.1.x Reference Guide - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 61
- ms_q - msAsync_q - ms2ns_q - ns_q - nsirc_q - tns_q - nscam_q - restart_q - timer_q - response_q - receive_q - transmit_q - scn_q - smb_q - snmp_agt_q - famib_q - fru_q - ts_q Diagnostic and System Error Messages Version 3.1.x Reference Guide MQ_System Error Messages 61 - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 62
- 14MSG_RDTS_START - 15MSG_RDTS_SENDEFP - 16MSG_RDTS_RESET Recommended Action Run the mqshowall command and record the output. Provide both the mqshowall output and the error message to Technical Support. Severity Critical 62 Diagnostic and System Error Messages Version 3.1.x Reference - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 63
MQ_System Error Messages MQ-QTHR Message Debug MQ-QTHR, 5, mqWrite: msg threshold exceeded, queue = , queue ID = - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 64
System Error Messages MQ-QWRITE Message Critical MQ-QWRITE, 1, mqWrite, queue = , queue ID = msg = both the mqshowall output and the error message to Technical Support. Severity Critical 64 Diagnostic and System Error Messages Version 3.1.x Reference - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 65
access to, and control of, Zone information. MS-INVALID_CTRESP Message Error MS-INVALID_CTRESP, 2, MS Invalid CT Response from - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 66
Service Queue. ■ Explanation: Unable to add timer to resource. Recommended Action The switch switch using memshow and then contact Technical Support. Severity Error MS-PLDBSEG Message Warning MS-PLDBSEG, 3, MS Platform Segmented port = - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 67
MS Platform Services failed on the other switch. Recommended Action: The other switch may not support MS Platform Service. Check Services on the other switch. Recommended Action: Contact Technical Support. ■ Explanation: Exchange of Platform Service - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 68
Service switch number> Debug MS-PLSTATE, 5, MS Platform Service Switch did not respond to a request for GCAP (MS Get Capabilities) command. Recommended Action: No user action required. - Explanation: GCAP (MS Get Capabilities) is supported, but the flag for MS Platform Service - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 69
supported by another switch. Recommended Action: No action required. - Explanation: Request to exchange platform database was rejected. The other switch the Reliable Commit Service (RCS) has failed Support. Diagnostic and System Error Messages Version 3.1.x Reference Guide 69 - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 70
Messages Severity Debug MS-TIME_OUT Message Error MS-TIME_OUT, 2, MS switch and retry the request. If error recurs, contact Technical Support. Severity Error MS-UNEXPECTED_IUDATASZ Message - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 71
Try the operation again later or contact Technical Support. Severity Debug MS-UNSTABLE_FABRIC Message Debug MS-UNSTABLE_FABRIC, 5, MS detected MsgGCAP> - msPlatMsgGCAP - - MsPlayMsgActivateProc Diagnostic and System Error Messages Version 3.1.x Reference Guide 71 - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 72
corresponding domain. ■ Explanation: Target domain that caused error. Unique to the fabric. Recommended Action Copy the error message string and then contact Technical Support. Severity Debug 72 Diagnostic and System Error Messages Version 3.1.x Reference - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 73
Init (1), Database Exchange (2), Database Acknowledge Wait (3), Database Wait (4), and Full (5). NBFSM-DUPEPORTSCN Message Debug NBFSM-DUPEPORTSCN, 5, Duplicate E_Port SCN from port in state Explanation A duplicate E_Port State Change Number was - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 74
Message Warning NBFSM-XMITFLAG, 3, DB_XMIT_SET flag not set in state input , port Explanation From the current state, the database transmit set flag was not set for the specified input state on the specified port. - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 75
Support. Severity Error PS-MALLOC Message Error PS-MALLOC, 2, malloc failed Explanation The switch failed memory allocation. The information provided in describes where in the code the error occurred, for engineering troubleshooting. Diagnostic - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 76
and the error message and send both to Technical Support. Severity Error PS-TASKCREATE Message Error PS-TASKCREATE, 2, PS: taskCreate() Action Run the supportshow command and then contact Technical Support. Severity Error 76 Diagnostic and System Error Messages Version 3.1.x - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 77
API Daemon (RAPID) is used by Fabric Access for API-related tasks. RAPID-AUTH_ERR Message Warning RAPID-AUTH_ERR, 3, Authentication Error: client has bad credentials: < API host. Severity Warning Diagnostic and System Error Messages Version 3.1.x Reference Guide 77 - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 78
Service (RCS) System Error Messages get requests from Zoning, Security, or the Management Server to pass data messages to switches RCS-APP_NOTREG Message Error RCS- Support. Severity Error RCS-LOCAL_REJECT Message - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 79
in the error message and call Technical Support. Severity Informational RCS-RCSENABLED Message Debug RCS-RCSENABLED, 5, RCS has enabled. Recommended Action None required. Severity Debug RCS-RCSENOMEM Message Error RCS-RCSENOMEM, 2, Failed to allocate memory: - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 80
Explanation The RCS feature has been disabled on the local switch because not all switches in the fabric support RCS. Currently, versions 2.6, 3.1, and 4.1 support the RCS feature. Recommended Action Upgrade firmware to support RCS. Severity Debug 80 Diagnostic and System Error Messages - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 81
switches in the fabric or to all of the switches in the fabric. For example, if some of the switches switch does not respond, RTWR retries 100 times. RTWR-FAILED Message - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 82
detail 2>, if non-zero, contains the switch ID of the destination domain. - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 83
on the switch or call Technical Support ■ < Support. ■ , domain, ... Explanation: Transmission problem Support. Recommended Action See action provided with each appropriate message above. Severity Error Diagnostic and System Error Messages Version 3.1.x Reference Guide - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 84
Error Messages RTWR-TRANSMIT Message warning RTWR-TRANSMIT, message>: RTWR Transmit; maximum retries exhausted ■ : Port ■ : Domain ■ : Retry Count ■ specified Domain ID is offline. Call Technical Support if the error persists. Severity Warning 84 - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 85
fabric to distinguish between internal switch or fabric operation error or switch number> Error SEC-RSENDFAIL, 2, RCS process fails: %s Explanation The Reliable Commit Service can fail if one switch in the fabric is either secversionreset, and the like). If the switch is busy, the command may fail - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 86
switch. Probable causes for this error can be that the data package is corrupted, the time stamp on the package is out of range as a result of replay attack or out of sync time service Warning SEC-SECDLFAIL Message Warning SEC-SECDLFAIL, switch after 30 tries. The failure switch - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 87
the process or command. If the problem persists, contact Technical Support. Severity Informational SEC-SECINFORM Message Info SEC-SECINFORM, 4, Primary FCS receives data request from domain Diagnostic and System Error Messages Version 3.1.x Reference Guide 87 - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 88
Switch (FCS) received a data request from the specified domain. For example, if the switch rest of the switches in the fabric. switch number> Warning SEC-SEC_STATS, 3, Security statistics error: %s Explanation The switch the switch. problem persists, contact Technical Support. Severity Warning - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 89
an unauthorized host is accessing the switch through an API connection. Take appropriate action. Severity Informational SEC-SECVIOL_HTTP Message Info SEC-SECVIOL_HTTP, 4, to establish an HTTP connection. Diagnostic and System Error Messages Version 3.1.x Reference Guide 89 - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 90
switch management via the API. Ask them to stop if they should not be accessing the switch. If they should be accessing the switch . Severity Informational SEC-SECVIOL_TELNET Message Info SEC-SECVIOL_TELNET, 4, Security host is accessing the switch through an API connection. - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 91
to port of switch . Explanation A security violation was reported. The specified unauthorized device attempted to flogin to the specified port and switch. Recommended Severity Informational Diagnostic and System Error Messages Version 3.1.x Reference Guide 91 - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 92
as specified by your enterprise security policy. Severity Informational SECLIB-SECVIOL_LOGIN_HTTP Message Info SECLIB-SECVIOL_LOGIN_HTTP, 4, Security violation: Login failure attempt via HTTP the login failed. 92 Diagnostic and System Error Messages Version 3.1.x Reference Guide - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 93
by your enterprise security policy. Severity Informational SECLIB-SECVIOL_LOGIN_MODEM Message Info SECLIB-SECVIOL_LOGIN_MODEM, 4, Security violation: Login failure attempt access. Severity Informational Diagnostic and System Error Messages Version 3.1.x Reference Guide 93 - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 94
System Error Messages SECLIB-SECVIOL_LOGIN_REMOTE Message Info SECLIB-SECVIOL_LOGIN_REMOTE, 4, Security violation: Login failure attempt via TELNET/SSH/RSH. IP Addr: and SSH connections. Severity Informational 94 Diagnostic and System Error Messages Version 3.1.x Reference Guide - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 95
SECLIB_System Error Messages SECLIB-SECVIOL_LOGIN_SERIAL Message Info SECLIB-SECVIOL_LOGIN_SERIAL, 4, Security violation: Login failure attempt via SERIAL. Explanation A serial access. Severity Informational Diagnostic and System Error Messages Version 3.1.x Reference Guide 95 - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 96
Message Info ECLIB-SECVIOL_MSaccess, 4, Security violation: Unauthorized access from MS device node name , device port name . security policy. Severity Informational 96 Diagnostic and System Error Messages Version 3.1.x Reference Guide - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 97
non-primary Fibre Channel switch. Recommended Action No action required. Severity Informational SECLIB-SECVIOL_MSop Message Info SECLIB- FCS switch. Explanation A security violation was reported. A Management Server device is operating on a non-primary Fibre Channel switch. - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 98
SECLIB-SECVIOL_SCC, 4, Security violation: Unauthorized switch tries to join secure fabric. Explanation A security violation was reported. The specified unauthorized switch attempted to join the secure fabric. 98 Diagnostic and System Error Messages Version 3.1.x Reference Guide - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 99
Control Policy (SCC Policy specifies the WWNs of switches allowed in the fabric) to verify which switches are allowed in the fabric. If the switch is allowed in the fabric but is not included policy. Severity Informational Diagnostic and System Error Messages Version 3.1.x Reference Guide 99 - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 100
SAN. SLAP_CERTCHECKFAIL Message Error SLAP-CERTCHECKFAIL, 3, Security Violation: Certificate verification failed on port %d Probable Cause The certificate on a port , the switch should be disconnected from the fabric. Severity Error SLAP_MALLOCFAIL Message Error - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 101
failed. Reboot the switch and see if the problem persists. If the problem persists after reboot, call HP Technical Support. Severity Warning SLAP_SIGNCHECKFAIL Message Error SLAP-SIGNCHECKFAIL, 3, Security Violation: Signature verification failed on port %d Probable Cause The - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 102
System Error Messages Recommended Action Check the switch connected to the port; it could be a rogue switch. There could also be an intruder in the link. Determine whether an unauthorized switch has been added. If it is not authorized, disconnect it. If the switch is authorized, then add it to the - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 103
switch driver module that manages a Fibre Channel switch instance. SWITCH-SECVIOL_DCC Message Info SWITCH-SECVIOL_DCC, 4, Security violation: Unauthorized device tries to flogin to port - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 104
and SNMP traps, see the HP StorageWorks Fabric OS Reference Guide). For information on configuring the Track Change feature, refer to the HP StorageWorks Fabric OS Reference Guide or the HP StorageWorks Fabric OS Procedures Guide. TRACK-CONFIG_CHANGE Message Info TRACK-CONFIG_CHANGE - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 105
- tFaScn - tThFru Recommended Action No action required. To see the new configuration, issue the configshow. command. Severity Informational Diagnostic and System Error Messages Version 3.1.x Reference Guide 105 - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 106
FAILED_LOGIN, 4, Unsuccessful login Explanation A login attempt to the specified switch was unsuccessful. This may occur if the user name or Informational TRACK-LOGIN Message Info TRACK-LOGIN, 4, Successful login Explanation The specified switch reported a successful login. - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 107
TRACK-TRACK_OFF Message Info TRACK-TRACK_OFF, 4, Track-changes off Explanation The Track Change feature has been turned off using the Telnet command trackchangesset. Recommended Action No action required. Refer to the HP StorageWorks Fabric OS Procedures Guide to learn how to - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 108
TRACK-TRACK_ON Message Info TRACK-TRACK_ON, 4, Track-changes on Explanation The Track Change feature has been turned on using the Telnet command trackchangesset. Recommended Action No action required. Refer to the HP StorageWorks Fabric OS Procedures Guide to learn how to - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 109
Service provides fabric time synchronization by synchronizing all clocks in the fabric to the clock time on the principal switch. TS-CLKSVRERR Message - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 110
, point to an available server using the tsclockserver command. Network problems may have caused a temporary error; if the error does not recur, it may be ignored. Severity Warning TS-TSINFO Message Info TS-TSINFO, 4, Explanation Informational - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 111
reason and error code are specified in the message. Recommended Action See Fabric Watch User's Guide (AA-RTSGC-TE) for more information. Severity Warning TS-TSSVREXITS Message Warning TS-TSSVREXITS, 3, : TS Server Exiting... Explanation The Time Server is exiting. The - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 112
table. UCAST-DOUBLEPATH Message Debug UCAST-DOUBLEPATH, 5, Duplicate Path to Domain , Output Port = , PDB pointer = Duplicate paths were reported to the specified domain from the specified output port. The path database (PDB) pointer is the address of the path - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 113
is unreachable because no minimum cost path (FSPF UPATH) exists in the candidate list (domain ID list). Recommended Action This will end the current SPF computation. No user action is required. Severity Warning Diagnostic and System Error Messages Version 3.1.x Reference Guide - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 114
one member. Empty zones are not allowed. Zoning allows partitioning of a SAN into logical groupings of devices that access each other. Zones can be configured error messages indicate any problems associated with zoning. ZONE-DUPLICATE_ENTRY Message Warning ZONE-DUPLICATE_ENTRY Guide - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 115
ZONE_System Error Messages ZONE-ENFORCEMIX Message Warning ZONE-ENFORCEMIX, 3, WARNING - HARD & SOFT zones(%s, %s) definition overlap. Probable Cause A port is zoned with mixed devices (WWN and Domain, Port). During zoning database cross checking, one of the following is detected: - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 116
number> Probable Cause An incorrect zoning enforcement type was reported on the specified port. This indicates an error in the firmware. Recommended Action Copy the message and then contact Technical Support. Severity Error 116 Diagnostic and System Error Messages Version 3.1.x Reference Guide - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 117
set for a multiple-port device when using node WWN for zoning. Recommended Action Contact Technical Support. Severity Error ZONE-IOCTLFAIL Message Error ZONE- and then contact Technical Support. Severity Error Diagnostic and System Error Messages Version 3.1.x Reference - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 118
>. Probable Cause The required zoning license is missing. Recommended Action Install zoning license. Severity Error ZONE-PORT_OUT_OF_RANGE Message Warning ZONE-PORT_OUT_OF_RANGE, 3, port non-exist or is not a F/FL-port. Probable Cause The port zone member that is targeted - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 119
for a quad port group. Refer to zoning in the HP StorageWorks Fabric OS Version 3.1.x/4.1.x User Guide. If you exceed the maximum number of entries that the hardware can handle, zoning reverts to soft zoning and the switch and the SAN continue to run, but the hardware can no longer prevent transfers - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 120
but it failed. Recommended Action Collect the error information and then contact Technical Support. Severity Error ZONE-WWNINPORT Message Warning ZONE-WWNINPORT, 3, WARNING - WWN in HARD PORT zone . Probable Cause One or more devices are zoned as WWN (with WWN - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 121
is accessing the port and disconnect it. Severity Error ZONE-WWNZONECHECK Message Error ZONE-WWNZONECHECK, 2, WWN zoneTypeCheck or zoneGroupCheck failure(%s) at port (%d) Probable Cause before the filter setup. Diagnostic and System Error Messages Version 3.1.x Reference Guide 121 - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 122
and then contact Technical Support. Severity Error ZONE-ZONEGROUPADDFAIL Message Warning ZONE-ZONEGROUPADDFAIL, 3, WARNING - port Out of CAM to have fewer zoned PIDs for that port. Severity Warning 122 Diagnostic and System Error Messages Version 3.1.x Reference - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 123
-NV_LOG_CLRD ERRLOG-NV_LOG_RESIZE ERRLOG-SET_MSG_SAVE_LVL Severity 2 Error 3 Warning 4 Informational 3 Warning 3 Warning 1 Critical 0 Panic 4 Informational 4 Informational 4 Informational 4 Informational 4 Informational Diagnostic and System Error Messages Version 3.1.x Reference Guide 123 - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 124
-INVHLO 2 Error LSDB-LSID 2 Error LSDB-MAXINCARN 4 Informational LSDB-NOLOCALENTRY 1 Critical LSDB-NOLSR 3 Warning MCAST-ADDBRANCH 2 Error 124 Diagnostic and System Error Messages Version 3.1.x Reference Guide - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 125
PS-ASSERT 2 Error PS-MALLOC 2 Error PS-TASKCREATE 2 Error RAPID-AUTH_ERR 3 Warning RCS-APP_NOTREG 2 Error RCS-LOCAL_REJECT 4 Informational Diagnostic and System Error Messages Version 3.1.x Reference Guide 125 - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 126
SEC-SECINFO 4 Informational SEC-SECINFORM 4 Informational SEC-SECVIOL_API 4 Informational SEC-SECVIOL_HTTP 4 Informational SEC-SECVIOL_TELNET 4 Informational SLAP_CERTCHECKFAIL 3 Warning 126 Diagnostic and System Error Messages Version 3.1.x Reference Guide - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 127
3 Warning SLAP_SIGNCHECKFAIL 3 Warning SLAP_WWNCHECKFAIL 3 Warning SWITCH-SECVIOL_DCC 4 Informational TRACK-CONFIG_CHANGE 4 Informational TRACK- Error ZONE-PORT_OUT_OF_RANGE 3 Warning ZONE-SOFTZONING 3 Warning Diagnostic and System Error Messages Version 3.1.x Reference Guide 127 - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 128
switch operating in a fully redundant state. To locate the description of a message in Chapter 2, activate the link to the message from the table. Table 6: Panic-Level Error Messages Message BLOOM-STUCK_WAIT Critical-Level Messages Critical-level messages indicate serious problems Reference Guide - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 129
Messages Message AS-CTMALLOC FSPF-INPORT FSPF-REMDOMAIN FSPF-SECTION FSPF-VERSION HLO-DEADTIMEOUT HLO-HLOTIMEOUT HLO-INVHLO Diagnostic and System Error Messages Version 3.1.x Reference Guide 129 - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 130
-SECDLFAIL ZONE-INCORRECT_ENFORCEMENT ZONE-INCORRECT_FA_CONFIG ZONE-INSUFF_PID_COUNT ZONE-IOCTLFAIL ZONE-NOLICENSE ZONE-TRANSCOMMIT ZONE-WWNSPOOF ZONE-WWNZONECHECK 130 Diagnostic and System Error Messages Version 3.1.x Reference Guide - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 131
MCAST-REMPORT MPATH-UNREACHABLE MS-PLDBSEG NBFSM-XMITFLAG RAPID-AUTH_ERR RTWR-TRANSMIT SEC-SEC_STATS SEC-SECDBFAIL SLAP_CERTCHECKFAIL SLAP_MALLOCFAIL Diagnostic and System Error Messages Version 3.1.x Reference Guide 131 - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 132
-TS_SVR_ERRCODE_EXITS TS-TSSVREXITS UPATH-UNREACHABLE ZONE-DUPLICATE_ENTRY ZONE-ENFORCEMIX ZONE-PORT_OUT_OF_RANGE ZONE-SOFTZONING ZONE-WWNINPORT ZONE-ZONEGROUPADDFAIL 132 Diagnostic and System Error Messages Version 3.1.x Reference Guide - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 133
recovery action. They record events in the system-for example, the disabling of a port or the clearing of a Switch Error Log-and provide a description of those events to the user. Table 10 lists SECLIB-SECVIOL_WSNMP SEC-SECINFO Diagnostic and System Error Messages Version 3.1.x Reference Guide 133 - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 134
SECINFORM SEC-SECVIOL_API SEC-SECVIOL_HTTP SEC-SECVIOL_TELNET SWITCH-SECVIOL_DCC TRACK-CONFIG_CHANGE TRACK-FAILED_LOGIN TRACK-LOGIN Messages Debug-level messages are produced by code inserted to inform HP that a suspected problem has occurred. Table 11 lists the debug messages. To Reference Guide - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 135
Table 11: Debug-Level Messages (Continued) Message NBFSM-DUPEPORTSCN RCS-RCSDISABLED RCS-RCSENABLED UCAST-DOUBLEPATH Error Message Tables Diagnostic and System Error Messages Version 3.1.x Reference Guide 135 - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 136
Error Message Tables 136 Diagnostic and System Error Messages Version 3.1.x Reference Guide - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 137
reseller, HP 12 C commands configshow 105 errclear 20, 21, 31, 32 errdump 16, 19 errnvlogdisable 31 errorshow 16 fabricshow 35 74 databases link state 44, 53, 54 MS platform 67 path 112 platform service 67 security 85 zoning 115, 116, 122 DCC (device connection control) 3.1.x Reference Guide 137 - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 138
(FCS) 88, 97 switch fabric (FCSF) 34 finite state machine 73, 74 frame filter logic 117, 121 G getting help 11 H hardware zoning enforcement 119, 120, 122 HELLO protocol 50 timeout value 51 help, obtaining 11 HP authorized reseller 12 storage website 11 technical support 11 worldwide technical - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 139
90 SLAP_CERTCHECKFAIL 100 SLAP_MALLOCFAIL 100 SLAP_SECPOLICYINIT 101 SLAP_SIGNCHECKFAIL 101 SLAP_WWNCHECKFAIL 102 SWITCH-SECVIOL_DCC 103 TRACK-CONFIG_CHANGES 104 TRACK-FAILED_LOGIN 106 TRACK-LOGOUT 107 117 ZONE-IOCTLFAIL 117 Diagnostic and System Error Messages Version 3.1.x Reference Guide 139 - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 140
88 symbols in text 10 symbols on equipment 11 syslogd daemon 16 system console 17 system error log 16 system logs commands to view 17 configuring 17 overview 15 T technical support, HP 11 text symbols 10 time server 111 time service 109 track change feature 104, 108 trackchangesset command 107, 108 - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 141
U unicast routing table 112 unicast tree 113 UNIX operating system 16 unzoned name server 65 W warning rack stability 11 symbols on equipment 11 Index warning-level messages 15, 131 web tools 36 websites, HP storage 9, 11 world wide name (WWN) 72, 99, 102, 115, 117, 120 WWN zone member 115 Z zone - HP StorageWorks 16-EL | diagnostic and system error messages version 3.1.x refer - Page 142
Index 142 Diagnostic and System Error Messages Version 3.1.x Reference Guide
reference
guide
hp
StorageWorks
diagnostic and system error
messages version 3.1.x
Product Version:
3.1.x
First Edition (July 2003)
Part Number:
AA-RUPZA-TE
This reference guide lists Fabric OS diagnostic and system error messages. The probable cause
and recommended course of action is provided for each message.