HP StorageWorks 16-EL HP StorageWorks SAN Switch 2/16 Fabric OS V3.1.2 Release
HP StorageWorks 16-EL - SAN Switch Manual
View all HP StorageWorks 16-EL manuals
Add to My Manuals
Save this manual to your list of manuals |
HP StorageWorks 16-EL manual content summary:
- HP StorageWorks 16-EL | HP StorageWorks SAN Switch 2/16 Fabric OS V3.1.2 Release - Page 1
2004) Part Number: AA-RR85E-TE This document contains last-minute and supplemental information about Fabric OS version 3.1.2 firmware for the HP StorageWorks SAN Switch 2/16. In the event of conflicting information between these Release Notes and other documents in this product release, the Release - HP StorageWorks 16-EL | HP StorageWorks SAN Switch 2/16 Fabric OS V3.1.2 Release - Page 2
HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP as constituting an additional warranty. SAN Switch 2/16 Fabric OS 3.1.2 Release Notes Fifth Edition (April 2004 - HP StorageWorks 16-EL | HP StorageWorks SAN Switch 2/16 Fabric OS V3.1.2 Release - Page 3
for systems administrators and technicians who are responsible for installing, operating, and maintaining Fabric OS version 3.1.2. Overview HP StorageWorks Fabric OS 3.1.2 provides the following enhancements for the SAN Switch 2/16: ■ Reduced fabric configuration downtime. ■ Extended Edge PID for - HP StorageWorks 16-EL | HP StorageWorks SAN Switch 2/16 Fabric OS V3.1.2 Release - Page 4
timezone time, rather than coordinated universal time (UTC). Supported Switches Fabric OS v3.1.2 supports the HP StorageWorks SAN Switch 2/16. Technical Support Contact Hewlett-Packard support for hardware, firmware, and software support, including product repairs and part ordering. To assist your - HP StorageWorks 16-EL | HP StorageWorks SAN Switch 2/16 Fabric OS V3.1.2 Release - Page 5
and best practices documents, is available at the HP web site: http://welcome.hp.com/country/us/eng/prodserv/storage.html. Note: HP has made every effort to provide you with the Industry Association web site, located at http://www.fibrechannel.org. SAN Switch 2/16 Fabric OS 3.1.2 Release Notes 5 - HP StorageWorks 16-EL | HP StorageWorks SAN Switch 2/16 Fabric OS V3.1.2 Release - Page 6
cases, HP may add proprietary supplemental functions to those specified in the standards. We verify conformance with Fibre Channel Standards by subjecting our switches to 1.7 ■ FC-BB-2 Rev 5.3 ■ IPFC RFC 2625 ■ FCP ANSI X3.269: 1996 ■ FCP-2 Rev 7 6 SAN Switch 2/16 Fabric OS 3.1.2 Release Notes - HP StorageWorks 16-EL | HP StorageWorks SAN Switch 2/16 Fabric OS V3.1.2 Release - Page 7
of Advanced Web Tools updates for this release: ■ Advanced Web Tools integrated management Graphical User Interface (GUI) recognizes HP StorageWorks switches released after Fabric OS v3.1.2 as generic 16-port switches. ■ When using a mixed fabric-that is, a fabric that contains v4.x, v3.x, and v2 - HP StorageWorks 16-EL | HP StorageWorks SAN Switch 2/16 Fabric OS V3.1.2 Release - Page 8
Support for Switch Admin Module The Mozilla browser does not support the Switch Admin module properly in Fabric OS v2.6.x. In Fabric OS v2.6.2, a warning message is displayed. No warning message is displayed in other 2.6.x versions. Workaround: Use Netscape 4.7.7 or later. 8 SAN Switch 2/16 - HP StorageWorks 16-EL | HP StorageWorks SAN Switch 2/16 Fabric OS V3.1.2 Release - Page 9
(recommended) 1.3.1_04 or 1.4.1_02 (recommended) The additional supported browsers, operating systems, and Java Plug-ins introduce limitations when using mixed OS versions in Advanced Web Tools v3.1.2. These limitations are described in Table 2. SAN Switch 2/16 Fabric OS 3.1.2 Release Notes 9 - HP StorageWorks 16-EL | HP StorageWorks SAN Switch 2/16 Fabric OS V3.1.2 Release - Page 10
system. See Table 1 supported browsers. When you are running Fabric View, the browser may crash. Workaround: Use a launch switch that runs Fabric OS versions v2.6.1, v3.0.x, or v4.0.x or later so that you can use Switch Explorer (instead of Fabric View). 10 SAN Switch 2/16 Fabric OS 3.1.2 Release - HP StorageWorks 16-EL | HP StorageWorks SAN Switch 2/16 Fabric OS V3.1.2 Release - Page 11
. To use zoning in a non-RCS (Reliable Commit Service) mode fabric (that is, in a fabric containing switches with firmware versions other than v2.6.x or later, v3.1 or later, and v4.1 or later) install all appropriate zoning licenses on all the switches in the fabric before attempting to bring - HP StorageWorks 16-EL | HP StorageWorks SAN Switch 2/16 Fabric OS V3.1.2 Release - Page 12
destination. If the user specifies the use of inactive ports or a path through a switch that does not have active routing tables to the destination, switch represents one hop. Other options allow the collection of information on the reverse path or on a user-selected path (source route). 12 SAN Switch 2/16 - HP StorageWorks 16-EL | HP StorageWorks SAN Switch 2/16 Fabric OS V3.1.2 Release - Page 13
They are reported below the routing information, separated into input port statistics and output port statistics. For each port, they are further separated into transmit and receive statistics. default value for the maximum hop count is 25. SAN Switch 2/16 Fabric OS 3.1.2 Release Notes 13 - HP StorageWorks 16-EL | HP StorageWorks SAN Switch 2/16 Fabric OS V3.1.2 Release - Page 14
option allows the user to specify a sequence of switches or ports (or areas) that the pathInfo frame must follow to reach the destination. Therefore, the path might be different from the one the actual traffic will take from source to destination. 14 SAN Switch 2/16 Fabric OS 3.1.2 Release Notes - HP StorageWorks 16-EL | HP StorageWorks SAN Switch 2/16 Fabric OS V3.1.2 Release - Page 15
is used by default or if the user specifies a destination port that is not active. For a switch with blades, the destination is specified as the area; otherwise, as the port. Show reverse path in addition to the forward path in the output display. SAN Switch 2/16 Fabric OS 3.1.2 Release Notes 15 - HP StorageWorks 16-EL | HP StorageWorks SAN Switch 2/16 Fabric OS V3.1.2 Release - Page 16
indicated, skipping possible intermediate switches. When using this option, the source route must be specified using domain numbers, rather than the output port. timeout The maximum time allowed to wait for the response. The default is 10 seconds. 16 SAN Switch 2/16 Fabric OS 3.1.2 Release Notes - HP StorageWorks 16-EL | HP StorageWorks SAN Switch 2/16 Fabric OS V3.1.2 Release - Page 17
no] Timeout: (1..30) [5] Target port is Embedded Hop In Port Domain ID (Name) Out Port BW Cost 0 E 9 (web226) 2 1G 1000 Port B/s (1s) B/x (64s) Txcrdz (1s) Txcrdz (64s) E 2 Tx Rx Tx Rx - - 0 0 - - 1 1 - - 0 - - - 0 - SAN Switch 2/16 Fabric OS 3.1.2 Release Notes - HP StorageWorks 16-EL | HP StorageWorks SAN Switch 2/16 Fabric OS V3.1.2 Release - Page 18
8 (web228) E - - Port B/s (1s) B/x (64s) Txcrdz (1s) Txcrdz (64s) F/s (1s) F/s (64s) Words Frames Errors 14 E Tx Rx Tx Rx 0 0 - - 5 5 - - 0 - - - 0 - - - 0 0 - - 0 0 - - 20158695 1021842 - - 1665662 56849 - - - 4 - - 18 SAN Switch 2/16 Fabric OS - HP StorageWorks 16-EL | HP StorageWorks SAN Switch 2/16 Fabric OS V3.1.2 Release - Page 19
This command affects the output displayed on the switch's console (serial port or Telnet session). By default, quiet mode is turned off and all switch tasks can send output to the console. Some ) 1 to set quiet mode (only shell commands can print) SAN Switch 2/16 Fabric OS 3.1.2 Release Notes 19 - HP StorageWorks 16-EL | HP StorageWorks SAN Switch 2/16 Fabric OS V3.1.2 Release - Page 20
Mode is OFF sw5:admin> quietMode 1 Committing configuration...done. Quiet Mode is now ON switchShow The switchShow command now supports the -portcount option, which returns the number of ports on the switch. The syntax is: switchShow, "-portcount" 20 SAN Switch 2/16 Fabric OS 3.1.2 Release Notes - HP StorageWorks 16-EL | HP StorageWorks SAN Switch 2/16 Fabric OS V3.1.2 Release - Page 21
if problems are found. Recommended Action For the SAN Switch 2/16, replace the motherboard FRU. For the SAN Switch 2/8 EL, replace the entire switch. For the SAN Switch 2/16, replace the motherboard FRU. For the SAN Switch 2/8 EL, you must replace the entire switch. For the SAN Switch 2/16, replace - HP StorageWorks 16-EL | HP StorageWorks SAN Switch 2/16 Fabric OS V3.1.2 Release - Page 22
. If the problem persists: For the SAN Switch 2/16, replace the motherboard FRU. For the SAN Switch 2/8 EL, you must replace the entire switch. For the SAN Switch 2/16, replace the motherboard FRU. For the SAN Switch 2/8 EL, you must replace the entire switch. For the SAN Switch 2/16, replace the - HP StorageWorks 16-EL | HP StorageWorks SAN Switch 2/16 Fabric OS V3.1.2 Release - Page 23
if problems are found. Recommended Action For the SAN Switch 2/16, replace the motherboard FRU. For the SAN Switch 2/8 EL, you must replace the entire switch. For the SAN Switch 2/16, replace the motherboard FRU. For the SAN Switch 2/8 EL, you must replace the entire switch. For the SAN Switch 2/16 - HP StorageWorks 16-EL | HP StorageWorks SAN Switch 2/16 Fabric OS V3.1.2 Release - Page 24
if problems are found. Port problems are found. Recommended Action For the SAN Switch 2/16, replace the motherboard FRU. For the SAN Switch 2/8 EL, you must replace the entire switch. For the SAN Switch 2/16, replace the motherboard FRU. For the SAN Switch 2/8 EL, you must replace the entire switch - HP StorageWorks 16-EL | HP StorageWorks SAN Switch 2/16 Fabric OS V3.1.2 Release - Page 25
ERRSTAT (BADORD), 1 Critical DIAG-ERRSTAT (CRC), 1 Probable Cause Port Error Statistics counter is nonzero, meaning that a Bad end of file . If the problem persists: For the SAN Switch 2/16, replace the motherboard FRU. For the SAN Switch 2/8 EL, you must replace the entire switch. Check for - HP StorageWorks 16-EL | HP StorageWorks SAN Switch 2/16 Fabric OS V3.1.2 Release - Page 26
(DISCC3), 1 Critical DIAG-ERRSTAT (ENCIN), 1 Probable Cause Port Error Statistics counter is nonzero, meaning that a Cyclic redundancy necessary. If the problem persists: For the SAN Switch 2/16, replace the motherboard FRU. For the SAN Switch 2/8 EL, you must replace the entire switch. Check for - HP StorageWorks 16-EL | HP StorageWorks SAN Switch 2/16 Fabric OS V3.1.2 Release - Page 27
Cause Port Error Statistics problem persists: For the SAN Switch 2/16, replace the motherboard FRU. For the SAN Switch 2/8 EL, you must replace the entire switch. For the SAN Switch 2/16, replace the motherboard FRU. For the SAN Switch 2/8 EL, you must replace the entire switch. SAN Switch 2/16 - HP StorageWorks 16-EL | HP StorageWorks SAN Switch 2/16 Fabric OS V3.1.2 Release - Page 28
if problems are found. Recommended Action For the SAN Switch 2/16, replace the motherboard FRU. For the SAN Switch 2/8 EL, you must replace the entire switch. For the SAN Switch 2/16, replace the motherboard FRU. For the SAN Switch 2/8 EL, you must replace the entire switch. For the SAN Switch 2/16 - HP StorageWorks 16-EL | HP StorageWorks SAN Switch 2/16 Fabric OS V3.1.2 Release - Page 29
problems are found. Port problems are found. Recommended Action For the SAN Switch 2/16, replace the motherboard FRU. For the SAN Switch 2/8 EL, you must replace the entire switch. For the SAN Switch 2/16, replace the motherboard FRU. For the SAN Switch 2/8 EL, you must replace the entire switch - HP StorageWorks 16-EL | HP StorageWorks SAN Switch 2/16 Fabric OS V3.1.2 Release - Page 30
port (N) and re-execute the test. Check for a faulty cable or deteriorated SFP. Replace the cable or SFP if necessary. If the problem persists: For the SAN Switch 2/16, replace the motherboard FRU. For the SAN Switch 2/8 EL, you must replace the entire switch. For the SAN Switch 2/16, replace - HP StorageWorks 16-EL | HP StorageWorks SAN Switch 2/16 Fabric OS V3.1.2 Release - Page 31
Cause Port counter value problem persists: For the SAN Switch 2/16, replace the motherboard FRU. For the SAN Switch 2/8 EL, you must replace the entire switch. For the SAN Switch 2/16, replace the motherboard FRU. For the SAN Switch 2/8 EL, you must replace the entire switch. For the SAN Switch 2/16 - HP StorageWorks 16-EL | HP StorageWorks SAN Switch 2/16 Fabric OS V3.1.2 Release - Page 32
necessary. If the problem persists: For the SAN Switch 2/16, replace the motherboard FRU. For the SAN Switch 2/8 EL, you must replace the entire switch. For the SAN Switch 2/16, replace the motherboard FRU. For the SAN Switch 2/8 EL, you must replace the entire switch. 32 SAN Switch 2/16 Fabric OS
Release Notes
hp
StorageWorks
SAN Switch 2/16
Fabric OS 3.1.2
Fifth Edition (April 2004)
Part Number:
AA–RR85E–TE
This document contains last-minute and supplemental information about Fabric OS version
3.1.2 firmware for the HP StorageWorks SAN Switch 2/16. In the event of conflicting
information between these Release Notes and other documents in this product release, the
Release Notes take precedence.
For the latest version of these Release Notes and other Fabric OS v3.1.2 documentation, go to
the HP Storage web site at:
.