HP StorageWorks 16-EL HP StorageWorks Zoning V3.1.x/4.1.x User Guide (AA-RS26C - Page 49
To Specify by AL_PA, To specify a Combination of looplet and AL_PA
View all HP StorageWorks 16-EL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Using QuickLoop Zones To Specify by AL_PA Specify the QuickLoop zone name, in quotes, with the QuickLoop name and desired AL_PAs, in quotes. All AL_PAs must be associated with a QuickLoop name. For example: Zonecreate "QLZoneName", "qloop1[01,02,04,e0,e1,e2]" To specify a Combination of looplet and AL_PA Example: Zonecreate "QLZoneName", "0,2; 0,3; qloop1[ca,cb,e1,e2]" Define a QuickLoop Zone Configuration To define a QuickLoop zone configuration, assign a zone configuration name and specify the QuickLoop zones to be included, by zone name. The QuickLoop names of the QuickLoop zones must also be included in the zone configuration. An example of a QuickLoop zone configuration is: cfgname "cfgname", "QLZoneName" For example: cfgname "QLconfig_1", "QLZoneName", "qloop1[01,02,04,e0,e1,e2]" cfgenable "QLconfig_1" Zoning Version 3.1.x/4.1.x User Guide 49