HP Tc2100 hp server tc2100 NOS installation guide (English) - Page 10
Create Microsoft Windows NT Installation Diskettes
View all HP Tc2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Chapter 2 Installing Microsoft Windows NT 4.0 Server NOTE If the Windows PC does not auto-start the Startup menu, start it by opening Startup.htm found at the root level of the Startup CD. Section 2. Create Microsoft Windows NT Installation Diskettes Three installation diskettes are required to install Microsoft Windows NT 4.0 on your server. Follow these steps to create these installation diskettes: 1. Locate three blank, formatted 3.5" diskettes. 2. Insert your Microsoft Windows NT 4.0 CD-ROM into a desktop PC. 3. From a DOS prompt, type: C:\D:\i386\winnt32 /ox (where D is the drive letter for the CD-ROM) 4. Follow the prompt and insert the diskettes in the order described. Section 3. Perform Windows NT Installation The installation of Windows NT contains several phases: • Phase 1 - Driver(s) Installation • Phase 2 - Hard Drive Preparation • Phase 3 - System Configuration Details • Phase 4 - Configuring the Network • Phase 5 - Completing the Installation • Phase 6 - Install the Service Pack • Phase 7 - Install the HP Video Driver NOTE Do not try to install Windows NT 4.0 via booting from the Windows NT CD-ROM. This method of installation does not work properly on most servers. The installation procedure will prompt you to insert the Windows NT CD-ROM at a later time. 4