HP Tc2100 hp server tc2100 NOS installation guide (English) - Page 3

Contents 1 Preparing your HP Server tc2100 for your NOS installation 1 Section 1. Hardware Setup 1 Preparing your Hard Disk Drives 1 Section 2. Updating your Server BIOS 1 Section 3. Run HP Diagtools 2 Section 4. Using the Startup CD 2 2 Installing Microsoft Windows NT 4.0 Server 3 Prepare the Installation 3 High Level Process Flow 3 Section 1. Create the Drivers Diskettes 3 Section 2. Create Microsoft Windows NT Installation Diskettes 4 Section 3. Perform Windows NT Installation 4 PHASE 1 - Drivers Installation 5 PHASE 2 - Hard Drive Preparation 5 PHASE 3 - System Configuration Details 6 PHASE 4 - Configure the Network 7 PHASE 5 - Completing the Installation 8 PHASE 6 - Install the Service Pack 9 PHASE 7 - Install HP Video Driver 10 Section 4. Initialize Hard disk Drive 10 Section 5. Perform Hardware Status Check 11 Section 6. Attach Clients to Network and Test Network Link 11 Section 7. Installing Additional Adapters Drivers 12 Ethernet Adapter 12 HP NetRAID-1M Adapter 13 Troubleshooting 13 Tip #1. Troubleshooting SCSI Host Bus Adapter Configuration 13 Tip #2. NT Warning About Drives with More than 1024 Cylinders 14 Tip #3. Service Pack Files Replaced Without Feedback 15 Tip #4. Using the NT Event Log to Diagnose Network Adapter Problems . 15 Tip #5. Booting from Another SCSI HDD 15 Tip #6. Restarting Windows NT installation 15 On-Line Information and Software Sources 16 iii