HP rp5400 Carrier Grade Addendum - rp5400 Series of Servers - Page 39
Attach the slide bracket cover.,
View all HP rp5400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Installation Connecting the Server to DC Power Source Attach the slide bracket cover. Attach the slide bracket cover to the front enclosure rail using 2 M5 x 16 T25 screws to cover the cable connectors on the front of the slide tray. Figure 1-13 Attaching the Slide Bracket Cover NOTE Any remaining hardware provided with the Slide Tray kit is not used. Chapter 1 27
Chapter 1
Installation
Connecting the Server to DC Power Source
27
Attach the slide bracket cover.
Attach the slide bracket cover to the front enclosure rail using 2 M5 x 16 T25 screws to cover the cable
connectors on the front of the slide tray.
Figure 1-13
Attaching the Slide Bracket Cover
NOTE
Any remaining hardware provided with the Slide Tray kit is not used.