HP rp5800 Hardware Reference Guide HP rp5800 - Page 26
Removing an Expansion Slot Cover,
View all HP rp5800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
NOTE: Before removing an installed expansion card, disconnect any cables that may be attached to the expansion card. a. If you are installing an expansion card in a vacant socket, remove the appropriate expansion slot cover on the back of the chassis. Pull the slot cover straight up then away from the inside of the chassis. Figure 2-15 Removing an Expansion Slot Cover b. If you are removing a PCI Express x1 card, hold the card at each end, and carefully rock it back and forth until the connectors pull free from the socket. Pull the expansion card straight up from the socket then away from the inside of the chassis to release it from the chassis frame. Be sure not to scrape the card against the other components. 20 Chapter 2 Hardware Upgrades ENWW