HP rp5800 Hardware Reference Guide HP rp5800 - Page 32
CAUTION, Removing the Powered Serial Port Caps
View all HP rp5800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Figure 2-22 Removing the Powered Serial Port Caps To install a Powered Serial Port expansion card: 1. Remove/disengage any security devices that prohibit opening the computer. 2. Remove all removable media, such as compact discs or USB flash drives, from the computer. 3. Turn off the computer properly through the operating system, then turn off any external devices. 4. Disconnect the power cord from the power outlet and disconnect any external devices. CAUTION: Regardless of the power-on state, voltage is always present on the system board as long as the system is plugged into an active AC outlet. You must disconnect the power cord to avoid damage to the internal components of the computer. 5. If the computer is on a stand, remove the computer from the stand. 6. Remove the computer access panel. 26 Chapter 2 Hardware Upgrades ENWW