HP rp5800 Hardware Reference Guide HP rp5800 - Page 39
Removing the Riser Card Bracket
View all HP rp5800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
10. To remove the riser card, disconnect the hood sensor cable from the system board (1), pull back the arm on the back of the riser card slot (2), then lift the riser card out of the riser card slot (3). Figure 2-32 Removing the Riser Card 11. Remove the two screws that secure the metal bracket to the top of the card and remove the bracket. You do not need to remove the hood sensor from the bracket. Figure 2-33 Removing the Riser Card Bracket ENWW Replacing the Riser Card 33
10.
To remove the riser card, disconnect the hood sensor cable from the system board (1), pull back
the arm on the back of the riser card slot (2), then lift the riser card out of the riser card slot (3).
Figure 2-32
Removing the Riser Card
11.
Remove the two screws that secure the metal bracket to the top of the card and remove the
bracket. You do not need to remove the hood sensor from the bracket.
Figure 2-33
Removing the Riser Card Bracket
ENWW
Replacing the Riser Card
33