HP rp5800 Hardware Reference Guide HP rp5800 - Page 41
Installing an Expansion Card in the Riser Card, Replacing the Riser Card
View all HP rp5800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
14. If any expansion cards were removed from the old riser card, install the cards into the appropriate slots on the new riser card. Move the card toward the rear of the chassis so that the bracket on the card is aligned with the open slot on the rear of the chassis (1). Press the card straight down into the expansion socket on the riser card (2). Figure 2-36 Installing an Expansion Card in the Riser Card 15. Close the expansion card retention latch. Figure 2-37 Closing the Expansion Card Retention Latch ENWW Replacing the Riser Card 35
14.
If any expansion cards were removed from the old riser card, install the cards into the
appropriate slots on the new riser card. Move the card toward the rear of the chassis so that the
bracket on the card is aligned with the open slot on the rear of the chassis (1). Press the card
straight down into the expansion socket on the riser card (2).
Figure 2-36
Installing an Expansion Card in the Riser Card
15.
Close the expansion card retention latch.
Figure 2-37
Closing the Expansion Card Retention Latch
ENWW
Replacing the Riser Card
35