HP rp5800 Hardware Reference Guide HP rp5800 - Page 57
Connecting the Hard Drive Power and Data Cables, Installing the Hard Drive
View all HP rp5800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
12. Align the guide screws with the slots on the chassis drive cage, press the hard drive down into the bay, then slide it back until it stops and locks in place. Figure 2-61 Installing the Hard Drive 13. Connect the power cable (1) and data cable (2) to the back of the hard drive. NOTE: The data cable for the primary hard drive must be connected to the dark blue connector labeled SATA0 on the system board to avoid any hard drive performance problems. Figure 2-62 Connecting the Hard Drive Power and Data Cables NOTE: Refer to System Board Drive Connections on page 39 for an illustration of the system board drive connectors. 14. Rotate the drive cage for internal drives and the power supply down to their normal positions. 15. Replace the access panel. 16. If the computer was on a stand, replace the stand. 17. Reconnect the power cord and any external devices, then turn on the computer. 18. Lock any security devices that were disengaged when the access panel was removed. ENWW Installing and Removing Drives 51