HP rp5800 Hardware Reference Guide HP rp5800 - Page 55
Installing and Removing Drives
View all HP rp5800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
5. If the computer is on a stand, remove the computer from the stand. 6. Remove the computer access panel. 7. Rotate the drive cage for internal drives to its upright position. Figure 2-56 Rotating the Drive Cage Up 8. Rotate the power supply to its upright position. The hard drive is located beneath the power supply. NOTE: If you are using a PS/2 mouse and/or PS/2 keyboard, make sure they are unplugged from the rear of the computer so that the connectors do not block the power supply from rotating all the way back. Figure 2-57 Raising the Power Supply ENWW Installing and Removing Drives 49
5.
If the computer is on a stand, remove the computer from the stand.
6.
Remove the computer access panel.
7.
Rotate the drive cage for internal drives to its upright position.
Figure 2-56
Rotating the Drive Cage Up
8.
Rotate the power supply to its upright position. The hard drive is located beneath the power
supply.
NOTE:
If you are using a PS/2 mouse and/or PS/2 keyboard, make sure they are unplugged
from the rear of the computer so that the connectors do not block the power supply from rotating
all the way back.
Figure 2-57
Raising the Power Supply
ENWW
Installing and Removing Drives
49