HP rp7440 Installation Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 17
Front Panel, Front Panel Indicators and Controls, Enclosure Status LEDs, Cell Board
View all HP rp7440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Figure 1-5 Left-Rear View Front Panel Front Panel Indicators and Controls The front panel, located on the front of the server, includes the power switch. See Figure 1-6 Enclosure Status LEDs The following status LEDs are on the front panel: • Locate LED (blue) • Power LED (tri-color) • Management processor (MP) status LED (tri-color) • Cell 0, 1 status (tri-color) LEDs Figure 1-6 Front Panel LEDs and Power Switch Cell Board The cell board, illustrated in Figure 1-7, contains the processors, main memory, and the CC application specific integrated circuit (ASIC) which interfaces the processors and memory with the I/O, and to the other cell board in the server. The CC is the heart of the cell board, enabling communication with the other cell board in the system. It connects to the processor dependent hardware (PDH) and micro controller hardware. Each cell board holds up to two processor modules and 16 memory DIMMs. One or two cell boards can be installed in the server. A cell Detailed Server Description 17