HP rp7440 Installation Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 4

Cabling and Power Up...53 Checking the Voltage...53 Preface...53 Voltage Range Verification of Receptacle 53 Verifying the Safety Ground (Single Power Source 54 Verifying the Safety Ground (Dual Power Source 55 Voltage Check (Additional Procedure 57 Connecting AC Input Power...58 Installing The Line Cord Anchor (for rack mounted servers 59 Two Cell Server Installation (rp7410, rp7420, rp7440, rx7620, rx7640 59 Core I/O Connections...60 MP/SCSI I/O Connections ...60 LAN/SCSI Connections...61 Management Processor Access 61 Setting Up the Customer Engineer Tool (PC 61 Setting CE Tool Parameters...61 Connecting the CE Tool to the Local RS232 Port on the MP 62 Turning on Housekeeping Power and Logging in to the MP 62 Configuring LAN Information for the MP 63 Accessing the Management Processor via a Web Browser 65 Verifying the Presence of the Cell Boards 66 System Console Selection...67 VGA Consoles...68 Interface Differences Between Itanium-based Systems 68 Other Console Types...68 Additional Notes on Console Selection 68 Configuring the Server for HP-UX Installation 69 Booting the Server ...69 Selecting a Boot Partition Using the MP 70 Verifying the System Configuration Using the EFI Shell 70 Booting HP-UX Using the EFI Shell 70 Adding Processors with Instant Capacity 70 Installation Checklist...71 4 Table of Contents