HP rp7440 Installation Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 30
Removing the Polystraps and Cardboard, CAUTION
View all HP rp7440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Figure 2-1 Removing the Polystraps and Cardboard 3. Remove the corrugated wrap from the pallet. 4. Remove the packing materials. CAUTION: Cut the plastic wrapping material off rather than pull it off. Pulling the plastic covering off represents an electrostatic discharge (ESD) hazard to the hardware. 5. Remove the four bolts holding down the ramps, and remove the ramps. 30 Installing the Server
Figure 2-1
Removing the Polystraps and Cardboard
3.
Remove the corrugated wrap from the pallet.
4.
Remove the packing materials.
CAUTION:
Cut the plastic wrapping material off rather than pull it off. Pulling the plastic
covering off represents an electrostatic discharge (ESD) hazard to the hardware.
5.
Remove the four bolts holding down the ramps, and remove the ramps.
30
Installing the Server