HP rp7440 Installation Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 44
Installing Additional Cards and Storage - service guide
View all HP rp7440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
The 60A IEC PDU has four 16A circuit breakers and is constructed for International use. Each of the four circuit breakers has two IEC-320 C19 outlets providing a total of eight IEC-320 C19 outlets. Each PDU is 3U high and is rack-mounted in the server cabinet. Documentation for installation will accompany the PDU. The documentation can also be found at the external Rack Solutions Web site at: http://www.hp.com/racksolutions This PDU might be referred to as a Relocatable Power Tap outside HP. The PDU installation kit contains the following: • PDU with cord and plug • Mounting hardware • Installation instructions Installing Additional Cards and Storage This section provides information on additional products ordered after installation and any dependencies for these add-on products. The following options may be installed in the server. • Additional hard disk drive storage • Removable media device storage • PCI and PCI-X I/O cards Installing Additional Hard Disk Drives The disk drives are located in the front of the chassis (Figure 2-17). The hard disk drives are hot-plug drives. A list of replacement disk drives for the server is in Appendix A of the HP Service Guide. The list contains both removable media disk drives and hard disk drives. 44 Installing the Server