HP rp7440 Installation Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 45
Removable Media Drive Installation, Disk Drive and DVD Drive Location
View all HP rp7440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Figure 2-17 Disk Drive and DVD Drive Location Use the following procedure to install the disk drives: 1. Be sure the front locking latch is open, then position the disk drive in the chassis. 2. Slide the disk drive into the chassis, a slow firm pressure is needed to properly seat the connector. 3. Press the front locking latch to secure the disk drive in the chassis. 4. If the server OS is running, spin up the disk by entering one of the following commands: #diskinfo -v /dev/rdsk/cxtxdx #ioscan -f Removable Media Drive Installation The DVD drive, or DAT tape drive is located in the left front of the chassis. The server power must be turned off before installation. Installing Additional Cards and Storage 45
Figure 2-17 Disk Drive and DVD Drive Location
Use the following procedure to install the disk drives:
1.
Be sure the front locking latch is open, then position the disk drive in the chassis.
2.
Slide the disk drive into the chassis, a slow firm pressure is needed to properly seat the
connector.
3.
Press the front locking latch to secure the disk drive in the chassis.
4.
If the server OS is running, spin up the disk by entering one of the following commands:
#diskinfo -v /dev/rdsk/cxtxdx
#ioscan -f
Removable Media Drive Installation
The DVD drive, or DAT tape drive is located in the left front of the chassis. The server power
must be turned off before installation.
Installing Additional Cards and Storage
45