HP rp7440 Installation Guide, Fourth Edition - HP Integrity rx7640 and HP 9000 - Page 51
Installing an A6869B VGA/USB PCI Card in a Server, PCI I/O Slot Details
View all HP rp7440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Figure 2-19 PCI I/O Slot Details 7. Wait for the green power LED to stop blinking. 8. Check for errors in the hotplugd daemon log file (default: /var/adm/hotplugd.log). The critical resource analysis (CRA) performed while doing an attention button initiated add action is very restrictive and the action will not complete-it will fail-to protect critical resources from being impacted. For finer control over CRA actions use pdweb or the olrad command. Refer to the Interface Card OL* Support Guide located on the Web at http://docs.hp.com for details. 9. Replace the top cover. 10. Connect all cables to the installed PCI card. Installing an A6869B VGA/USB PCI Card in a Server The A6869B VGA/USB PCI card is a dual function combo card, hosting VGA and universal serial bus (USB) controllers. Both of these devices sit behind a PCI-PCI bridge. The A6869B VGA/USB PCI card operates at the conventional 66MHz/64 bit PCI rate and is universally keyed. All signalling and form factors conform to the PCI Local Bus Specification 2.3. The VGA controller has 128Mbits of DDR-1 RAM for use as a frame buffer. The A6869B VGA/USB PCI card can be installed into any slot in a PCI/PCI-X backplane. Installing Additional Cards and Storage 51