Hitachi 42PD8800 Owners Guide - Page 19

ENGLISH BASIC OPERATION Power On/Off Now, turn On the main power of the unit. Make sure that the Power Cord has plugged into the wall socket. To turn On the power of the unit: 1. Press the Main Power switch on the unit. The Indicating Lamp will illuminates in Red (Standby mode). Main Power switch (on the bottom surface) 2. Press Sub Power button either on the control panel or on the remote control. The color of the Indicating Lamp turns into Green, and the image will display on the screen. Sub Power button To turn Off the power of the unit: 1. Press Sub Power button either on the control panel or on the remote control. The image disappears from the screen and the Indicating Lamp turns into Red (Standby mode). 2. Press Main Power switch to completely turn Off the power of the unit. Sub Power button SD MEMORY CARD PUSH-EJECT P P OK Indicating Lamp Status Off Red Green Orange The Indicating Lamp Status Check PH35814 Power Status Off Standby mode On Power Save mode* Power Switch Status Main power → Off Main power → On Sub Power button → Off Main power → On Sub power button → On Main power → On Sub Power button → On *About Power Save mode, see "Power Save Mode" and "When Following Messages Appear on the Screen" on 52 and 54 for details. NOTE If the image does not appear on the screen at all, or have any problem, see TROUBLESHOOTING on 54 ~ 56 . It may help you to solve the problems. You can turn ON the power only by pressing the Sub Power button during the Standby mode. Do not switch the power On/Off repeatedly in a short period of time. It could cause malfunction. To avoid sudden surges of electricity when the power comes back on, turn Off the main power of the unit before you leave if there is a blackout during use of the unit. 18