Hitachi 42PD8800 Owners Guide - Page 57
Check if the Screen Saver is OFF. - 42pd8800ta parts
View all Hitachi 42PD8800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
ENGLISH TROUBLESHOOTING (continued) Symptom and Check List (continued) Symptoms Cannot display the image from "Photo Input function". Check list Check the connecting equipments and image format. (Please refer to "Photo Input function".) Page 45 , 49 , 50 The image on the screen is moving in an oblique direction. Adjust "Horizontal Clock" and "Clock Phase". 25 (PC input mode only) The coarse horizontal stripes could be seen in full-display mode. Adjust "Horizontal Clock". 25 (PC input mode only) The part of the image is lacking. (PC input mode only) AAAAA Check if the "Screen Saver" is OFF. Try "Auto Adjust". 25 , 27 The horizontal stripes are moving vertically with flickering screen. (PC input mode only) Check the Signal status of the PC by pressing button on the remote control. If the Vertical Frequency of the PC is set to less than 85Hz, adjust its level higher (up to 85Hz). 26 Set "Vertical Filter" to ON. (Please note that you will have lower vertical resolution with this action.) When the characters are displayed on the whole screen, the vertical Try "Auto Adjust". ABCDEFGHIJ stripes appear and some of the abcdefgABCDEFGabcd If the display condition is not improved with Auto Adjust, 25 ABCDEFGHIJ characters are blurred. abcdefgABCDEFGabcd adjust "Horizontal Clock". (PC input mode only) When the letter string is displayed in full-screen, all of the characters on the screen are blurred. ABCDEFGHIJ abcdefgABCDEFGabcd ABCDEFGHIJ Try "Auto Adjust". If the condition is not improved with Auto Adjust, adjust 25 (PC input mode only) abcdefgABCDEFGabcd "Clock Phase" till you get clearest image. When the small patterns are displayed on the screen, the entire screen is flickering. (PC input mode only) The thickness of the letters, lines, etc is not displayed evenly. (PC input mode only) Try "Auto Adjust". If the condition is not improved with Auto Adjust, adjust 25 "Clock Phase" till you get flicker-free display. It could happen when the image with more than 512 lines (42PD8800TA) / 768 lines (55PD8800TA) of vertical 59 resolution is displayed. Please note this is not malfunction. 56