Hitachi DZ-HS903A Owners Guide - Page 151
occurred. Keep DVD
UPC - 050585224117
View all Hitachi DZ-HS903A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
Message Cause & Troubleshooting CHECK DVD • A disc unusable on this camcorder may have been inserted or the disc may be damaged. • Make sure that the type of disc is correct, and that the disc is not write-protected. CHECK HDD • Check to see whether the HDD is write-protected. Otherwise, the HDD may be destroyed. Control Information Scenes may have been edited on another device, etc. Error. Update the control information. • Use another disc. • See *3 and *4 on p.156. COPY PROTECTED The video signal input to this camcorder may be copyguarded. Some prerecorded video materials, such as movies, are guarded against copying. Copy-guarded materials cannot be recorded on this camcorder. Dubbing is not complete. This message will appear when dubbing has failed. DVD error has occurred. • Use another disc. • See *3 and *4 on p.156. • A mismatch in recording information may be caused when editing is done on another device. Format the disc or use another disc. • Formatting the disc will erase all data on it. DVD error has • Disc error occurred during finalizing, and finalizing occurred. Finalizing failed. Replace the disc. is not complete. • See *3 on p.156. DVD error has • Was the disc formatted on a PC, or formatting occurred. Format the interrupted? DVD now? Select "YES" to format the disc. Formatting the disc will erase all data on it. • See *2 on p.156. DVD error has The disc may be dirty. occurred. Formatting Remove the disc and wipe off fingerprints, dust, etc., is not complete. before reusing it, or use another disc. This message may also appear if you insert a disc for which formatting was interrupted midway. In this case, try formatting the disc or use another one. DVD error has Disc error could have occurred during editing of scenes. occurred. Keep DVD Turn off the camcorder with the disc being used in it, inside & restart. connect AC adapter/charger, and then power the camcorder again. Repair of scenes will be tried. Reference page 32, 113 113 162 - 123 - - 112 120 112 112, 170 38 Additional Information 151