Husqvarna AUTOMOWER 115H 4G Owner Manual - Page 12
Battery safety, How to lift and move the product, To stop the product on, Battery
View all Husqvarna AUTOMOWER 115H 4G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
• Metal objects in the ground (for example reinforced concrete or anti-mole nets) can result in a stoppage. The metal objects can cause interference with the loop signal which then can lead to a stoppage. • Operation and storage temperature is 0-50 °C / 32-122 °F. Temperature range for charging is 0-45 °C / 32-113 °F. Too high temperatures might cause damage to the product. 2.3.2 Battery safety • Start the product according to the instructions. When the product is turned on, make sure to keep your hands and feet away from the rotating blades. Never put your hands and feet under the product. • Never touch moving hazardous parts, such as the blade disc, before it has come to a WARNING: Lithium-ion batteries can explode or cause fire if disassembled, short-circuited, exposed to water, fire, or high temperatures. Handle carefully, do not dismantle, open the battery or use any type of electrical/mechanical abuse. Avoid storage in direct sunlight. complete stop. • Never lift up the product or carry it around when it is turned on. For more information about the battery, refer to Battery on page 32 • Do not let persons who do not know how the product works and behaves use it. 2.3.3 How to lift and move the product • The product must never be allowed to To safely move from or within the work area: collide with persons or other living creatures. If a person or other living creature comes in the product's way it shall be stopped immediately. Refer to To stop the product on page 28. 1. Press the STOP button to stop the product. If security is set to high level (refer to To set the security level on page 23) the PIN code has to be entered. The PIN code contains four digits and is selected when you start the • Do not put anything on top of the product or product for the first time. Refer to To do the its charging station. basic settings on page 21. • Do not allow the product to be used with a defective guard, blade disc or body. Neither should it be used with defective blades, screws, nuts or cables. Never connect a damaged cable, or touch a damaged cable before it is disconnected from the supply. • Do not use the product if the ON/OFF button does not work. • Always switch off the product using the ON/OFF button when the product is not in use. The product can only start when the ON/OFF button has been turned on and the correct PIN code has been entered. 2. Press the ON/OFF button and make sure • HUSQVARNA does not guarantee full compatibility between the product and other types of wireless systems such as remote controls, radio transmitters, hearing loops, the product is turned off. Check that the indicator lamp on the ON/OFF button is not lit. This means that the product is disabled. Refer to The indicator lamp on page 27. underground electric animal fencing or similar. 12 - Safety 982 - 003 -