Husqvarna AUTOMOWER 115H 4G Owner Manual - Page 25

3.

Use the

arrow buttons

to specify the

distance in cm.

4.

Push the

BACK

button.

3.9.6 To set the Drive Past Wire function

The front of the product always moves past the

boundary wire by a specified distance before the

product moves back into the work area. The

factory setting is 32 cm. You can select a

distance of 20-30 cm.

1.

Do steps 1–3 in

To get access to the menu

on page 21

.

2.

Use the

arrow button

and the

OK

button to

move through the menu structure

Settings >

Installation > Drive Past Wire

.

3.

Use the

arrow buttons

to set the distance in

cm.

4.

Push the

BACK

button.

3.9.7 ECO mode

ECO mode

stops the signal in the boundary loop,

the guide wire and the charging station, when the

product is parked or is charging.

Note:

Use

ECO mode

to save energy and avoid

interference with other equipment, for example

hearing loops or garage doors.

Note:

Push the

STOP

button before you remove

the product from the charging station. If not, the

product can not be started in the work area.

3.9.7.1 To set the ECO mode

1.

Do steps 1–3 in


on page 21

.

2.

Use the arrow buttons and the

OK

button to


Settings >

Installation > ECO mode

.

3.

Push the

OK

button to select the

ECO

mode

.

4.

Push the

BACK

button.

3.9.8 To avoid collisions with the mower

house

If you have installed a mower house (accessory),

the wear on the product and the mower house

decreases when you select

Avoid house

collisions

.

1.

Do steps 1–3 in


on page 21

.

2.

Use the arrow buttons and the

OK

button to


Settings >

Installation > Mower house > Avoid house

collisions

.

3.

Push the

BACK

button.

Note:

If

Avoid house collisions

is selected it can

result in grass that is not cut around the charging

station.

3.9.9 Automower

®

Connect@Home

The product can connect to mobile devices that

have the Automower

®

Connect app installed.

Automower

®

Connect is a free app for your

mobile device. The short-range interaction with

the product is called Automower

®

Connect@Home. When pairing between the

product and app has been confirmed, you have

access to the menus and functions as long as

you are within short-range (Bluetooth

®

).

3.9.9.1 To install the Automower

®

Connect app

1.

Download the Automower

®

Connect app on

your mobile device.

2.

Register in the Automower

®

Connect app.

3.

Log in to your Husqvarna account in the

Automower

®

Connect app.

3.9.9.2 To pair Automower

®

Connect and the

product

1.

Do steps 1–3 in


on page 21

.

2.

Use the

arrow buttons

and the

OK

button to


Settings >

Installation > Connect@Home > New

pairing

.

3.

Select

My mowers

in the Automower

®

Connect app.

4.

Select the plus sign (+).

5.

Follow the instructions in the app.

3.9.10 General

In

General

you can change the general settings

of the product.

3.9.10.1 To set the time & date

1.

Do steps 1–3 in


on page 21

.

982 - 003 -

Installation -

25

Section	Page
Contents	2
Introduction	3
Introduction	3
Support	3
Product description	3
Product overview	4
Symbols on the product	5
Symbols on the display	5
Symbols on the battery	5
Menu structure overview	7
Display	8
Keypad	8
Safety	9
Safety definitions	9
General safety instructions	9
IMPORTANT. READ CAREFULLY BEFORE USE. KEEP FOR FUTURE REFERENCE	10
Safety instructions for operation	11
Use	11
Battery safety	12
How to lift and move the product	12
Maintenance	13
In the event of a thunderstorm	13
Installation	14
Introduction - Installation	14
Before the installation of the wires	14
Before the installation of the product	14
To examine where to put the charging station	14
To examine where to put the power supply	15
To examine where to put the boundary wire	15
To put the boundary wire in a slope	16
Passages	17
To make an island	17
To make a secondary area	17
To examine where to put the guide wire	18
Work area examples	18
Installation of the product	19
To install the charging station	19
To install the boundary wire	19
To install the guide wire	19
To put the wire into position with stakes	20
To bury the boundary wire or the guide wire	20
To extend the boundary wire or the guide wire	20
After the installation of the product	21
To do a visual check of the charging station	21
To do the basic settings	21
Guide calibration	21
To do the product settings	21
To get access to the menu	21
To do the schedule settings	21
Wizard	21
To calculate the schedule setting	22
To set the schedule	22
To copy the schedule setting	22
To reset the schedule setting	22
Security level	23
To set the security level	23
To change the PIN-code	23
Lawn Coverage	23
To set the Lawn Coverage function	23
To do a test of the Lawn Coverage function	24
To measure the distance from the charging station	24
To disable or enable the Lawn Coverage function	24
To reset the Lawn Coverage settings	24
To set the starting point	24
To set the Drive Past Wire function	25
ECO mode	25
To set the ECO mode	25
To avoid collisions with the mower house	25
Automower® Connect@Home	25
To install the Automower® Connect app	25
To pair Automower® Connect and the product	25
General	25
To set the time & date	25
To set the language	26
To set the country	26
To reset all user settings	26
The About menu	26
Operation	27
The ON/OFF button	27
The indicator lamp	27
To start the product	27
Operating modes	27
Main area	28
2nd area	28
Park	28
Park / Schedule	28
Override schedule	28
Spot cutting	28
To stop the product	28
Switch off	28
To charge the battery	29
Adjust the cutting height	29
To adjust the cutting height	29
Maintenance	30
Introduction - maintenance	30
Clean the product	30
Chassis and blade disc	30
Wheels	30
Cover	30
Charging station	31
Replace the blades	31
To replace the blades	31
Firmware update	31
Battery	32
To replace the battery	32
Winter service	33
Troubleshooting	34
Introduction - troubleshooting	34
Fault messages	34
Information messages	38
Indicator lamp in the charging station	39
Symptoms	40
Find breaks in the loop wire	41
Transportation, storage and disposal	44
Transportation	44
Storage	44
Disposal	44
Technical data	45
Technical data	45
Registered trademarks	47
Warranty	48
Warranty terms	48
Applicable to US/CA market	49
Supplier's Declaration of Conformity	49

Husqvarna AUTOMOWER 115H 4G Owner Manual - Page 25

To set the Drive Past Wire function, ECO mode, To set the ECO mode

Page 25 highlights