Husqvarna AUTOMOWER 115H 4G Owner Manual - Page 17
Passages, To make an island, To make a secondary area, cm / 0
View all Husqvarna AUTOMOWER 115H 4G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
CAUTION: Do not put the guide wire across the boundary wire, for example a boundary wire that >15% goes to an island. A • Slopes adjacent to a public road must be isolated with boundary wire. Put a fence or a protective wall along the outer edge of the slope. 3.3.3.2 Passages A passage is a section that has boundary wire on each side and that connects 2 work areas. The passage must be a minimum of 60 cm / 24 in. wide. Note: If a passage is less than 2 m / 6.5 ft. wide, install a guide wire through the passage. 3.3.3.3 To make an island • Put the boundary wire to and around the obstacle to make an island. • Put the 2 sections of boundary wire that run to and from the obstacle together. • Put the 2 sections of boundary wire in the same stake. 3.3.3.4 To make a secondary area Make a secondary area (B) if the work area has 2 areas that are not connected with a passage. The work area with the charging station is the main area (A). Note: The product must be manually moved between the main area and the secondary area. B A 0 cm / 0" • Put the boundary wire around the secondary area (B) to make an island. Refer to To make an island on page 17. CAUTION: Do not put a section of boundary wire across the other. The sections of boundary wire must be parallel. Note: The boundary wire must be put as 1 loop around all of the work area (A + B). 982 - 003 - Installation - 17