Husqvarna AUTOMOWER 115H 4G Owner Manual - Page 23
Security level, To set the security level, To change the PIN-code, Lawn Coverage
View all Husqvarna AUTOMOWER 115H 4G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
3.9.3 Security level There are 3 security levels for the product. Function Low Medium High Alarm X PIN-code X X Time lock X X X • Alarm - An alarm goes off if the PIN-code is not entered within 10 seconds after the STOP button is pushed. The alarm also goes off when the product is lifted. The alarm stops when the PIN-code is entered. • PIN-code - The correct PIN-code must be entered to get access to the Menu structure of the product. If the incorrect PIN-code is entered 5 times, the product is locked for a time. The lock is extended for each new incorrect try. • Time lock - The product locks if the PINcode has not been entered in 30 days. Enter the PIN-code to get access to the product. 3.9.3.1 To set the security level Select 1 of 3 security levels for your product. 1. Do steps 1-3 in To get access to the menu on page 21. 2. Use the arrow buttons and the OK button to move through the menu structure Settings > Security > Security level. 3. Use the arrow buttons and the OK button to select the level of security. 4. Push the OK button. 3.9.3.2 To change the PIN-code 1. Do steps 1-3 in To get access to the menu on page 21. 2. Use the arrow buttons and the OK button to move through the menu structure Settings > Security > Advanced > Change PIN-code. 3. Enter the new PIN code. 4. Push the OK button. 5. Enter the new PIN code. 6. Push the OK button. 7. Make a note of the new PIN code. Refer to Introduction on page 3. 3.9.4 Lawn Coverage The Lawn Coverage function is used to guide the product to remote parts of the work area. If the work area includes areas that are connected with narrow passages, the Lawn Coverage function is useful to be able to maintain a well-cut lawn in all parts of the yard. The product begins to mow when it reaches the remote area. At all other times, the product leaves the charging station in the standard manner and starts to mow. Note: You can use up to 3 remote areas but the sum of Proportion for Area 1-3 cannot exceed 100%. 3.9.4.1 To set the Lawn Coverage function 1. Do steps 1-3 in To get access to the menu on page 21. 2. Use the arrow buttons and the OK button to move through the menu structure Settings > Lawn Coverage > Area 1-3. 3. Use the arrow button to select the area. 4. Push the OK button. 5. Measure the distance from the charging station to the start of the area. Measure along the guide wire. Refer to To measure the distance from the charging station on page 24. 6. Push the arrow buttons to select the distance, measured in m. 7. Push the OK button. 982 - 003 - Installation - 23