Husqvarna AUTOMOWER 115H 4G Owner Manual - Page 32
Battery, To replace the battery
View all Husqvarna AUTOMOWER 115H 4G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
5.5 Battery WARNING: Only charge the product using a charging station which is intended for it. Incorrect use may result in electric shock, overheating or leakage of corrosive liquid from the battery. In the event of leakage of electrolyte flush with water and seek medical help if it comes in contact with the eyes etc. 2. Set the cutting height to MIN. 3. Turn the product upside down. Place the product on a soft and clean surface to avoid scratching the body and the display cover. 4. Clean around the battery cover. 5. Unscrew the screws to the battery cover (Torx 20) and remove the battery cover. WARNING: Use only original batteries recommended by the manufacturer. Product safety cannot be guaranteed with other batteries. Do not use nonrechargeable batteries. CAUTION: The battery must be charged fully before winter storage. If the battery is not fully charged it can be damaged and in certain cases be rendered useless. If the operating times for the product are shorter than normal between charges, this indicates that the battery is getting old and eventually needs replacing. Note: Battery life is dependent on the length of the season and how many hours a day the product is operating. A long season or many hours of use a day means that the battery must be replaced more regularly. The battery is fine as long as the product maintains a well-cut lawn. 5.5.1 To replace the battery WARNING: Use only original batteries recommended by the manufacturer. Product safety cannot be guaranteed with other batteries. Do not use nonrechargeable batteries. The appliance must be disconnected from the supply mains when removing the battery. 1. Press the ON/OFF button for 3 seconds to turn off the product. Check that the indicator lamp on the ON/OFF button is not lit. 6. Release the latch of the connector and pull it upwards. CAUTION: Do not pull the cables. 7. Release the latch of the battery holder and lift up the battery holder (including the battery) from the product. If the new battery is encapsulated in a hard plastic shell, go to number 10. 8 This side down 7 7 6 8. Release the latch of the battery and lift up the battery from the battery holder. 9. Place the new battery into the battery holder. Note: The sticker "This side down" must be facing up when you place it into position. This means that "This side down" will be facing downwards when the product is standing on its wheels. 32 - Maintenance 982 - 003 -