Husqvarna AUTOMOWER 115H 4G Owner Manual - Page 29
To charge the battery, Adjust the cutting height
View all Husqvarna AUTOMOWER 115H 4G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
4.6 To charge the battery When the product is new or has been stored for a long period, the battery can be empty and needs to be charged before starting. In the Main area mode, the product automatically alternates between mowing and charging. WARNING: Only charge the product using a charging station which is intended for it. Incorrect use may result in electric shock, overheating or leakage of corrosive liquid from the battery. In the event of leakage of electrolyte flush with water and seek medical help if it comes in contact with the eyes etc. 1. Press the ON/OFF button to start the product. 2. Place the product in the charging station. Slide the product in as far as possible to ensure proper contact between the product and the charging station. Refer to contact and charging strips in Product overview on page 4 3. The display shows a message that charging is in progress. 4.7 Adjust the cutting height The cutting height can be varied from MIN (5 cm / 2 in.) to MAX (9 cm / 3.6 in.). CAUTION: During the first weeks after a new installation, the cutting height must be set to MAX to avoid damaging the loop wire. After this, the cutting height can be lowered step by step every week until the desired cutting height has been reached. 5 6 7 8 OK 3. Turn the knob to the required position. • Turn clockwise to increase the cutting height. • Turn counter-clockwise to decrease the cutting height. 4. Close the hatch. 4.7.1 To adjust the cutting height 1. Press the STOP button to stop the product. 2. Open the hatch. 982 - 003 - Operation - 29