IBM 43635gu User Guide - Page 67
Configuring the server, Broadcom NetXtreme Gigabit Ethernet controller configuration
UPC - 883436002950
View all IBM 43635gu manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Chapter 3. Configuring the server The following configuration programs are available to configure the server: v Configuration/Setup Utility program The Configuration/Setup Utility program is part of the basic input/output system (BIOS) code in the server. You can use this program to configure serial port assignments, change interrupt request (IRQ) settings, change the device startup sequence, set the date and time, set passwords, and set the chassis intrusion detector. For information about using this utility program, see "Using the Configuration/Setup Utility program" on page 54. v IBM ServerGuide Setup and Installation CD The ServerGuide program provides software-setup tools and installation tools that are designed for the server. Use this CD during the installation of the server to configure basic hardware features, such as an integrated SAS/SATA controller with RAID capabilities, and to simplify the installation of the operating system. For information about using this CD, see "Using the ServerGuide Setup and Installation CD" on page 57. v Boot Menu program The Boot Menu program is part of the BIOS code in the server. Use it to temporarily assign a device to be first in the startup sequence, overriding the startup sequence that is set in the Configuration/Setup Utility program. For information about using this utility program, see "Using the Boot Menu program" on page 59. v Broadcom NetXtreme Gigabit Ethernet Boot Agent The Broadcom NetXtreme Gigabit Ethernet Boot Agent is part of the BIOS. You can use it to configure the network as a startable device, and you can customize where the network Startup optional devices occurs in the startup sequence. Enable and disable the Broadcom NetXtreme Gigabit Ethernet Boot Agent from the Configuration/Setup Utility program. For information, see "Enabling the Broadcom NetXtreme Gigabit Ethernet Boot Agent" on page 60. v Broadcom NetXtreme Gigabit Ethernet controller configuration To configure the integrated Gigabit Ethernet controller, see "Configuring the Broadcom NetXtreme Gigabit Ethernet controller" on page 60. v LSI Configuration Utility program Use the LSI Configuration Utility program to configure the integrated SAS controller with RAID capabilities and the devices that are attached to it. For information about using this program, see "LSI Configuration Utility program" on page 61. The following table lists the different server configurations and the applications available for configuring and managing RAID arrays. Table 3. Server configuration RAID array configuration RAID array management (before operating system is (after operating system is installed) installed) Integrated SATA and no SAS None controller card installed None SAS/SATA controller card (LSI 1064) installed LSI Utility (BIOS Utility CTRL+C), ServerGuide MyStorage (for monitoring storage only) © Copyright IBM Corp. 2008 53