IBM 8676 Installation Guide - Page 55
POST error messages, Hardware Maintenance Manual and Troubleshooting Guide
UPC - 087944770107
View all IBM 8676 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
POST error messages The following table provides an abbreviated list of the error messages that might appear during POST. Note: See the Hardware Maintenance Manual and Troubleshooting Guide for more information about the POST error messages. POST message 162 163 201 289 301 303 1162 00019xxx 00180xxx 012980xx 012981xx I9990305 Failing device or problem Suggested action found Change in device configuration 1. Run the Configuration/Setup Utility program; then, exit, saving the configuration settings. 2. Verify that your optional devices are turned on and installed correctly. Time of day has not been set Set the correct date and time. Change in memory configuration Verify that your memory is fully seated and installed properly. Failing DIMM was disabled Verify that your memory is correct for your server and that it is installed properly. Keyboard and keyboard controller Ensure that the keyboard cable is connected and nothing is resting on the keyboard keys. Serial port configuration conflict Start the Configuration/Setup Utility program and ensure that the IRQ and I/O port assignments needed by the serial port are available. Processor x is not functioning Verify that processor x is installed correctly. If the problem or failed the built-in test remains, replace processor x. A PCI adapter requested a Start the Configuration/Setup Utility program and ensure that the resource that is not available resources needed by the PCI adapter are available. Data for processor x Download and install the latest system BIOS level. POST could not find an operating system. Install your operating system. Chapter 5. Solving problems 43