Icom IC-V80 Instruction Manual - Page 10
Panel Description - ic v80e
View all Icom IC-V80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
2 PANEL DESCRIPTION ■ Front, top and side panels w Speaker q Microphone Keypad (p. 4) e r Function display (p. 6) t y u i q PTT SWITCH [PTT] ➥ Push and hold to transmit, release to receive. (p. 17) For IC-V80E only ➥ Push briefly, then push and hold to transmit a 1750 Hz tone burst signal. (p. 22) w ANTENNA CONNECTOR Connect the antenna here. (p. 1) e CONTROL DIAL [VOL] ➥ Adjust the volume level. (p. 14) ➥ During the Set mode, or Initial Set mode, rotate to select a desired option or value. (pp. 38, 43) r EXTERNAL SPEAKER/MICROPHONE JACKS [SP MIC] Used to connect an optional speaker-microphone, plug adapter cable or cloning cable. The internal microphone and speaker will not function when an option is connected. See page 51 for a list of available options. Be sure to turn power OFF before connecting/disconnecting optional equipment to/from the [SP/MIC] jack. t MONITOR KEY [MONI] ➥ Push and hold to open the squelch temporarily to monitor the operating frequency. (p. 14) ➥ While pushing and holding this key, push [] or [] to adjust the squelch level. (p. 14) ➥ Enters or sends the DTMF code 'A.' (pp. 35, 36)