Icom IC-V80 Instruction Manual - Page 38

7 SCAN OPERATION ■ Priority watch A priority watch checks for signals on "priority channels" while operating on a VFO frequency. D Memory or Call channel watch While operating on a VFO frequency, the memory or Call channel watch checks for signals on the selected channel every 5 sec. q Select a desired memory channel or the Call channel. w P ush [FUNC](M), and then [PRIO](7) to start the watch. • The decimal point ".", on the frequency readout blinks. • When a signal is detected on the channel, the watch resumes according to the scan resume setting. (p. 30) VFO frequency Memory channel 5 sec. e T o cancel the watch, push any key except MONI], [FUNC](M), or [PTT]. D Memory scan watch While operating on a VFO frequency, a memory scan watch checks for signals on each memory channel in sequence, every 5 sec. q P ush [VFO/MR/CALL] several times to select the memory mode. w P ush [FUNC](M), and then [SCAN](5) to start a memory scan. e P ush [FUNC](M), and then [PRIO](7) to start the watch. • The VFO mode is selected, and the decimal point ".", on the frequency readout blinks. • When a signal is detected on a channel, the watch resumes according to the scan resume setting. (p. 30) Memory scan VFO frequency Mch 0 Mch 1 Mch 2 SKIP 5 sec. Mch 199 r T o cancel the watch, push any key except MONI], [FUNC](M), or [PTT]. 31