Icom IC-V80 Instruction Manual - Page 54
Microphone simple mode, Battery protection, Auto low power
View all Icom IC-V80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
10 SET MODES D Microphone simple mode Microphone simple mode is used to assign the essential operations to the four switches (S1 to S4) on the remote control unit. • mS .Sm S1 Selects the Call channel. S2 Turns the monitor function ON or OFF. S3 Selects memory channel 0. S4 Selects memory channel 1. • mS .n1 (default) S1 Toggles the VFO mode and the memory mode. S2 Selects the Call channel. S3 Frequency or memory channel "UP." S4 Frequency or memory channel "DOWN." • mS .n2 S1 Toggles the VFO mode and the memory mode. S2 Turns the monitor function ON or OFF. S3 Frequency or memory channel "UP." S4 Frequency or memory channel "DOWN." • U ser remote control unit The below circuit is for reference only. to the [SP] jack 2.7kW 6.8kW 15kW 33kW REMOTE 3.5(d) mm S1 S2 S3 S4 SP + GND - EXTERNAL SPEAKER Rated input >‗ 700 mW (8 W) 47 D Battery protection When the battery voltage decreases, the battery protection function automatically turns the transceiver OFF. Select the function according to your battery type. (default: differs depending on the version) • bAt.OF • bAt.nm • bAt.LI : Turns the function OFF. Select when you use the BP-263 battery case. : Select when you use the BP-264 Ni-MH battery pack. : Select when you use the BP-265 Li-Ion battery pack. NOTE: BE SURE to select an appropriate option according to your battery type. D Auto low power Turns the auto low power function ON or OFF. When the temperature goes below 0°C (+32°F), the function automatically sets the output power to low. In that case, the transmit power selections (Hi/Mid) are also disabled. (default: ALP.OF)