Icom IC-V80 Instruction Manual - Page 61

15 SPECIFICATIONS D General • Frequency coverage : (unit: MHz) Version U.S.A. AUS CHN EXP EUR TX 144-148 136-174* RX 136-174* 136-174* UK KOR 144-146 144-146 * Guaranteed: Only 144-148 MHz range • Mode : FM, FM-N • Number of memory channels : 207 (incl. 6 scan edges and 1 Call channel) • Usable temperature range : -20°C to +60°C; -4°F to +140°F • Tuning steps : 5, 10, 12.5, 15, 20, 25, 30 and 50 kHz • Frequency stability : ±2.5 ppm (-20°C to +60°C; -4°F to +140°F) • Power supply : Icom specified battery pack/case • Current drain (at 7.2 V DC: typical) Transmit at 5.5 W (High) : 1.4 A at 2.5 W (Mid.) 0.9 A at 0.5 W (Low) 0.6 A Receive standby : 65 mA power save 20 mA max. audio 310 mA (internal speaker) 180mA (external speaker) • Antenna connector : BNC (50 W) 1 • Dimensions (projections not included) : 58(W)×112(H)×30(D) mm; 29⁄32(W)×413⁄32(H)×13⁄16(D) in 2 • Weight (approx.) 3 (without battery pack/case and ant.) : 140 g; 4.9 oz 4 D Transmitter • Modulation system : Variable reactance freq. modulation 5 • Output power (at 7.2 V DC) : High 5.5 W, Mid. 2.5 W, Low 0.5 W. 6 • Max. frequency deviation : FM (wide) ±5.0 kHz FM (narrow) ±2.5 kHz 7 • Spurious emissions : Less than -60 dBc 8 • External mic. connector : 3-conductor 2.5 (d) mm (1⁄10˝)/2.2 kΩ 9 D Receiver 10 • Receive system : Double-conversion superheterodyne • Intermediate frequencies : 1st: 21.7 MHz, 2nd: 450 kHz 11 • Sensitivity (at 12 dB SINAD) : -0.14 μV typ. 12 • Squelch sensitivity (threshold) : -0.1 μV typ. • Selectivity : FM (wide) 70 dB typ. 13 FM (narrow) 50 dB typ. • Spurious and image rejection : 75 dB typ. 14 • Intermodulation : FM (wide) 70 dB typ. 15 FM (narrow) 65 dB typ. • Audio output power (at 10% distortion) 16 Internal speaker External speaker : 0.75 W typ. with a 16 Ω load : 0.45 W typ. with a 8 Ω load 17 • External speaker connector : 3-conductor 3.5(d) mm; (1⁄8˝)/8 Ω 18 All stated specifications are subject to change without notice or 19 obligation. 54