Icom IC-V80 Instruction Manual - Page 46
Set mode items
View all Icom IC-V80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
10 SET MODES ■ Set mode items D Repeater tone frequency Selects one of 50 subaudible tone frequencies used to access the repeaters. • 67.0-254.1 Hz (default: 88.5 Hz) D DTCS Code Selects one of 104 DTCS (both encoder/decoder) codes. • 023-754 (default: 023) D Tone squelch frequency Selects one of tone frequencies for tone squelch or pocket beep operation. • 67.0-254.1 Hz (default: 88.5 Hz) • Usable subaudible tone frequencies (unit: Hz) 67.0 79.7 94.8 110.9 131.8 156.7 171.3 186.2 203.5 229.1 69.3 82.5 97.4 114.8 136.5 159.8 173.8 189.9 206.5 233.6 71.9 85.4 100.0 118.8 141.3 162.2 177.3 192.8 210.7 241.8 74.4 88.5 103.5 123.0 146.2 165.5 179.9 196.6 218.1 250.3 77.0 91.5 107.2 127.3 151.4 167.9 183.5 199.5 225.7 254.1 The transceiver has 50 tone frequencies and consequently their spacing is narrow compared with units having 38 tones. Therefore, some tone frequencies may receive interference from adjacent tone frequencies. 39 • Available DTCS codes 023 054 125 165 245 274 356 445 506 627 732 025 065 131 172 246 306 364 446 516 631 734 026 071 132 174 251 311 365 452 523 632 743 031 072 134 205 252 315 371 454 526 654 754 032 073 143 212 255 325 411 455 532 662 036 074 145 223 261 331 412 462 546 664 043 114 152 225 263 332 413 464 565 703 047 115 155 226 265 343 423 465 606 712 051 116 156 243 266 346 431 466 612 723 053 122 162 244 271 351 432 503 624 731 D DTCS Polarity Selects the DTCS polarity between "dtP.nn" (normal), "dtP.nR" (TX: normal, RX: reverse), "dtP.Rn" (TX: reverse, RX: normal) and "dtP.RR" (reverse). (default: dtP.nn) The DTCS code's polarity for transmitting or receiving can be independently set by this item. TX/RX: Normal polarity TX/RX: Reverse polarity