Icom IC-V80 Instruction Manual - Page 32
Channel programming
View all Icom IC-V80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
6 MEMORY/CALL OPERATION ■ Channel programming q P ush [VFO/MR/CALL] several times to select the VFO mode. w Set a desired frequency. (p. 16) ➥ If desired, set other data (e.g. offset frequency, duplex direction, tone squelch, etc.). e P ush [FUNC](M), and then [VFO/MR/CALL]. • "X" and the memory channel number blink. • Select the Call channel mode to program the Call channel. r P ush [] or [] to select a desired channel. • Select "1A/1B" to "3A/3B" to program a scan edge channel. t P ush [FUNC](M), and then push and hold [VFO/MR/ CALL] for 1 sec. to store the entry. • 3 beeps sound. • If you continue to push and hold [VFO/MR/CALL] for 1 sec. after programming, the memory channel number automatically increases. NOTE: To cancel programming, push [VFO/MR/CALL] before storing the entry in step t. • Example- programming 145.440 MHz into memory channel 11 (a blank channel). Push , and then . Push or to select channel 11. The VFO mode Push , then push and hold for 1 sec. to program. Return to the VFO mode. 25