Icom IC-V80 Instruction Manual - Page 37

SCAN OPERATION 7 ■ Memory Scan A memory scan repeatedly scans memory channels, except those set as skip channels. q P ush [VFO/MR/CALL] several times to select the memory mode. • "X" appears. w P u s h [ F U N C ] ( M ) , t h e n [SCAN](5) to start the scan. • To change the scan direction, push [] or []. e T o cancel the scan, push any key except MONI] or [FUNC](M). ■ Setting skip channels In order to speed up the scan rate, you can set the memory channels you don't want to scan as skip channels. q Select a memory channel to be skipped. ➥ Push [VFO/MR/CALL] several times to select the memory mode, and then push [] or [] to select a desired channel. w P ush [FUNC](M), and then [SKIP](6) to turn the skip setting ON or OFF. • "SKIP" appears when the chan- Appears nel is set as a skip channel. ■ Scan resume setting 1 When a signal is received during a scan, the scan resume 2 setting determines what action the transceiver takes. The 3 transceiver has 2 scan resume settings, as described below. Use the Set mode to select the one which best suits your 4 needs. 5 q Push [FUNC](M), and then [SET](8) to enter the Set mode. 6 w P ush [] or [] to select the scan pause timer item (SCt, or SCP). 7 e R otate [VOL] to select a desired scan pause option. 8 • Pause scan The scan pauses until the received signal disappears, 9 and then resumes after 2 sec. 10 • Timer scan The scan pauses for 5 sec., 10 sec. or 15 sec., and then 11 resumes. 12 r Push [# ENT] to exit the Set mode. 13 [VOL] Pause scan 14 15 16 Timer scan (15 sec.) 17 18 19 30