Insignia NS-H2001 User Manual (English) - Page 10

Connecting a VCR or DVD player to your DVD receiver You can connect a VCR or DVD player to your DVD receiver in order to enjoy your home theater system's surround sound capabilities. 1 Jack panel of component S -V IDEO AV O UT V I DE O R- AUD I O -L 2 or 3 VIDEO OUT COMPONENT To connect a VCR or DVD player (1) to your DVD receiver using the AUX IN jacks (2): 1 Connect the AUDIO OUT jacks (left-white and right-red) of your VCR or DVD player to the AUDIO IN AUX 1 or AUX 2 jacks of your DVD receiver. 2 Before starting operation, press the SOURCE button to switch the DVD receiver input to AUX. • AUX IN 1 shows AUX 1 IN on the display • AUX IN 2 shows AUX 2 IN on the display To connect a VCR or DVD player to your DVD receiver using the COAXIAL IN jack (3): 1 Connect the COAXIAL OUT jack of your VCR or DVD player to the COAXIAL IN jack of your DVD receiver. 2 Before starting operation, press the SOURCE button to switch the DVD receiver input to COAXIAL. The display shows COAX IN. Remote control batteries The remote control requires two AAA (RO3) batteries (included). We recommend that you replace the batteries on a yearly basis or when the operation of the remote control becomes intermittent or unsatisfactory. Replace the original batteries with new AAA batteries. To replace the batteries: 1 Press the lock tab of the battery holder and open the battery compartment. 2 Place two AAA batteries in the battery holder, matching the + and - in the battery compartment with the + and - on the batteries. 3 Close the battery holder. Caution • Use only the size and type of batteries specified. • Make sure that you follow the correct polarity as indicated in the battery compartment. Reversed batteries may damage the device. • Do not mix different types of batteries together (for example, Alkaline and Carbon-Zinc), or old batteries with new ones. • If the remote is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage. • Do not try to recharge batteries not intended to be recharged. They can overheat and rupture. Using your home theater system Turning your home theater system on and off To turn your home theater system on and off: 1 After making audio and video connections, plug the power cord into a power outlet. 2 Press the STANDBY/ON button (on the remote control or the DVD receiver) to turn on your system. 3 Press the STANDBY/ON button again to turn your system to standby. Playing a DVD disc Cautions • Do not move the DVD receiver during playback. Doing so may damage the DVD receiver. • Do not push on the disc tray or put any objects, other than discs, in the tray. Doing so may cause the DVD receiver to malfunction. To play a disc: 1 Press OPEN/CLOSE ( ) to open the disc tray. 2 Insert a disc into the disc tray with the label side up. If you are loading a double-sided disc, load the side you want to play down. 3 Press OPEN/CLOSE ( ) again to close the disc tray. The disc normally starts playback automatically. If it does not, press PLAY/ PAUSE ( ) to start playback. 4 Set the volume to a comfortable level. Press MUTE to mute the sound and press MUTE again to turn the sound back on. 5 To stop the playback, press STOP ( ). Press PLAY/PAUSE ( ) to resume playback (from the stopped point). 6 Press OPEN/CLOSE ( ) to open the tray and remove the disc. 10 www.insignia-products.com