Intel DH61AG Technical Product Specification - Page 60
Add-in Card Connectors, 2.3.3, Power Supply Connectors
View all Intel DH61AG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Intel Desktop Board DH61AG Technical Product Specification Table 34. PCI Express Full-/Half-Mini Card Connector (continued) Pin Signal Name Additional Signal Name 39 +3.3 Vaux 40 GND 41 +3.3 Vaux 42 LED_WWAN# 43 Reserved 44 LED_WLAN# 45 Reserved (mSATA) Vendor 46 LED_WPAN# 47 Reserved (mSATA) Vendor 48 +1.5V 49 Reserved (mSATA) DA/DSS 50 GND 51 Reserved (mSATA) Presence Detection 52 +3.3V 2.2.3.2 Add-in Card Connectors The board has the following add-in card connectors: • One PCI Express 2.0 x4 connector. The x4 interface supports simultaneous transfer speeds up to 500 MB/s of peak bandwidth per lane, per direction, for up to 4 GB/s concurrent and bi-directional bandwidth. • One PCI Express Half-Mini Card slot • One PCI Express Full-/Half-Mini Card slot (removable stand-offs in full-length keep out zone allows repurposing of Full-Mini Card slot into Half-Mini Card slot) 2.2.3.3 Power Supply Connectors The board has the following power supply connectors: • External Power Supply - the board can be powered through a 19 V DC connector on the backpanel. The backpanel DC connector is compatible with a 7.4 mm/OD (outer diameter) and 5.1 mm/ID (inner diameter) plug, where the inner contact is +19 (±10%) V DC and the shell is GND. The maximum current rating is 12 A. • Internal Power Supply - the board can alternatively be powered via the internal 19 V DC 1 x 2 power connector, where pin 1 is GND and pin 2 is +19 (±10%) VDC. Table 35. 19 V Internal Power Supply Connector Pin Signal Name 1 Ground 2 +19 V (±10%) For information about Power supply considerations Refer to Section 2.6.1, page 71 60