Intel ISP2150 Quick Start Guide - Page 16

Installing the Front Bracket and Racking Your System The ISP2150 system comes with mounting bracket hardware that allows you to install it into cabinets and relay racks. The following procedures describe how to mount the ISP2150 system in each type of chassis. CAUTION Some racks and cabinets may not support the installation of the system. Before installing the system, be sure to refer to the specifications provided by the manufacturer to insure proper mounting configurations and maximum specified loads for the rack or cabinet are not exceeded. Installing the Front Bracket in a Cabinet 1. Attach the left and right front brackets to the system. Your system comes with left and right front brackets (A) and mounting bolts (B) to attach them to the system. Mount the brackets to the sides of the system with the bracket flange flush with the front panel. 2. Attach the rear support washer to the system. The system also comes with two support washers (C). Mount one on each side towards the rear panel of the system. B A C OM09334 18 ISP2150 2U Rack Server Platform Quick Start Guide