Intel ISP2150 Quick Start Guide - Page 25

Jumpers Nine 3-pin jumper blocks that control various configuration options, as shown in the figure below. Refer to the ISP2150 2U Rack Server Platform Product Guide for more information. WOL ENABLE J5A2 1 BMC WR EN J4J2 1 J3J1 BIOS WR EN J2J1 BMC FRC UP INT DET RCVRY BOOT FRB PSWD CLR 1 CMOS CLR 1 OM08429 Jumper Block J5A2 J4J2 J3J1 J3J1 J3J1 J2J1 Jumper Name WOL ENABLE Pins (default in bold) 1-2, Disabled BMC WR EN FRB INT DET BMC FRC UP CMOS CLR 2-3, Enabled 1-2, Protect 2-3, Erase/Program 1-2, Enable 2-3, Disable 5-6, Enable 6-7, Disable 9-10, Normal 10-11, Program 1-2, Protect 2-3, Erase What it does at system reset Disables Wake On LAN†. If your power supply does not provide 0.8 A of +5 V Standby current, you must move the WOL Enable jumper to this position. Enables Wake On LAN. BMC boot block is write protected. BMC boot block is erasable and programmable. FRB operation is enabled (system boots from processor 1 if processor 0 does not respond). FRB is disabled. Switch installed on chassis indicates when cover has been removed. Chassis intrusion switch is bypassed. System boots normally. System attempts to update BMC firmware. Preserves the contents of NVRAM. Replaces the contents of NVRAM with the manufacturing default settings. continued ISP2150 2U Rack Server Platform Quick Start Guide 27