Intel ISP2150 Quick Start Guide - Page 26

Jumper Block J2J1 J2J1 Jumper Name PSWD CLR RCVRY BOOT Pins (default in bold) 5-6, Protect 6-7, Erase 9-10, Normal 10-11, Recovery J2J1 BIOS WR EN 13-14, Protect 14-15, Erase/Program What it does at system reset Maintains the current system password. Clears the password. System attempts to boot using the BIOS stored in flash memory. BIOS attempts a recovery boot, loading BIOS code from a floppy diskette into the flash device. This is typically used when the BIOS code has been corrupted. BIOS boot block is write-protected. BIOS boot block is erasable and programmable. CAUTION Moving either of the boot block write protect jumpers (J4J2-BMC WR EN or J2J1- BIOS WR EN) may cause irrevocable damage to the server board. Only move these jumpers when directed to by your customer service representative.  NOTE If you wish to use the WOL feature, your power supply must provide 0.8 A of +5 V Standby current. If it does not, your server board may not boot. Move the WOL Enable jumper to the Disabled position if your power supply does not provide the required current. 28 ISP2150 2U Rack Server Platform Quick Start Guide