Intel ISP2150 Quick Start Guide - Page 21
system within the rail brackets such
UPC - 735858134668
View all Intel ISP2150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
7. Attach the side rail system's outer pieces (total of two) to the rail brackets you installed in step six. To attach the front part of an outer piece to a rail bracket, you must reveal the access hole (A) by sliding the innermost piece toward the back. Once you see the access hole, align it with the slot in the rail bracket such that you can secure the bolt. Do not tighten the nut and bolt until you have aligned the rear portion of the rail system (see the next step). 8. To attach the rear part of the rail system C to the rear rail bracket (A), slide the rail system within the rail brackets such that you can place a bolt through the rail's hole (B) and into the rail bracket's slot. Loosely tighten the bolt and nut. You should be able to slide the entire rail system back and forth in the rail brackets. When you have centered the rails in the bracket, tighten the fastening bolts and nuts. B A B A C OM09138 OM09144 ISP2150 2U Rack Server Platform Quick Start Guide 23