Intel MFS5520VI User Guide - Page 103
Clearing the Password
UPC - 735858209250
View all Intel MFS5520VI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Caution: Do not power down the system during the BIOS update process! Note: You may encounter a CMOS Checksum error or other problem after reboot. If this happens, shut down the compute module and boot it again. CMOS checksum errors require that you enter Setup, check your settings, save your settings, and exit Setup. Clearing the Password If the user or administrator password(s) is lost or forgotten, moving the password clear jumper into the "clear" position clears both passwords. You must restore the password clear jumper to its original position before you can set a new password(s). The password clear jumper is located on jumper block J9A3. 1. Power down the compute module. 2. Remove the compute module from the Intel® Modular Server System. 3. Remove the compute module cover. For instructions, refer to Section , "Removing the Top Cover" on page -14 4. Move the jumper (J9A3) from the default operating position, covering pins 1 and 2, to the password clear position, covering pins 2 and 3. Intel® Compute Module MFS5520VI User Guide 89