Intel MFS5520VI User Guide - Page 50
Removing Processor Air Duct, Removing a Compute Module from the Chassis
UPC - 735858209250
View all Intel MFS5520VI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
To install DIMMs, follow these steps: 1. Observe the safety and ESD information at the beginning of this manual and in the appendices. 2. If the compute module is installed in a chassis, remove it. For instructions, see "Removing a Compute Module from the Chassis" on page 13. 3. Remove the top cover. For instructions, see "Removing the Top Cover" on page 14. 4. Remove the processor air duct (see Figure 30). 1 I/O 2 1 2 ID AF003080 Figure 30. Removing Processor Air Duct 5. Locate the DIMM sockets. 6. Holding the DIMM by the edges, remove it from the package. 7. Make sure the clips at either end of the DIMM socket(s) are pushed outward to the open position (see letter "A" in Figure 31). 8. Holding the DIMM by the edges, remove it from its anti-static package. 9. Position the DIMM above the socket. Align the notch on the bottom edge of the DIMM with the key in the DIMM socket (see letter "B" in Figure 31 - the arrow is pointing to the key in the socket). 10. Insert the bottom edge of the DIMM into the socket. 11. When the DIMM is correctly positioned, push down on the top edge of the DIMM until the retaining clips snap into place (see letter "C" in Figure 31). 36 Intel® Compute Module MFS5520VI User Guide