Intel MFS5520VI User Guide - Page 40
Removing the Heatsink
UPC - 735858209250
View all Intel MFS5520VI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Removing the Heatsink 5. Loosen the four captive screws on the heatsink corners in a diagonal manner according to the numbers shown in Figure 19 as follows: a. Starting with the screw at location 1, loosen it by giving it two rotations in the anticlockwise direction (see letter "A" in Figure 19) and stop. (IMPORTANT: Do not fully loosen.) b. Proceed to the screw at location 2 and loosen it by giving it two rotations and stop. c. Loosen screws at locations 3 and 4 by giving each screw two rotations and then stop. d. Repeat steps 5a through 5c by giving each screw two rotations each time until all screws are loosened. 6. Twist the heatsink slightly to break the seal between the heatsink and the processor. 7. Lift the heatsink from the processor (see letter "B" in Figure 19). If it does not pull up easily, twist the heatsink again. Do not force the heatsink from the processor. Doing so could damage the processor. B 3 A Air Flow 2 1 4 TIM AF003123 Figure 19. Removing the Heatsink Removing the Old Processor 8. Push the lever handle down and away from the socket to release it (see letter "A" in Figure 20). 9. Rotate the lever open all the way (see letter "B" in Figure 20). 26 Intel® Compute Module MFS5520VI User Guide